LED Crossfalls
63 products
These LED Crossfalls To adopt absolutely honored Lady Nature! Among the most appreciated of Industrial lighting, the neon LED strips are without toxic agents and protect you from the ocular discomfort. Thanks to the LED technology of our lights, you save energy and earn more light power. This design lighting emits little heat and is presented in various models: Waterproof strips, of the Shapes with detector And even suspended offices. For all sizes and styles, you can choose between classic and modernity at Silumen.
Depending on the volume of the space to be illuminated, you can choose a 30 cm LED rule, a 60 cm LED Neon LED, a 90 cm LED light rule; a 120 cm LED rule Or a 150 cm LED rule. You can also adapt it to all the parts of your home without incident: with integrated neon LED or T8 LED tubes strips, they settle easily. Feel free to Order your LED Design Controls at Silumen, delivery is offered from € 59.90 purchase!
Recently viewed
Nos clients ont aussi aimé
Guide to choice and purchase of an LED rule on Silumen
In recent years, LED lighting has imposed itself in all rooms in the house. Among the wide range of lamps equipped with LED technology, LED strips offer powerful lighting Adapted to various uses, inside and out.
What are the advantages of an LED rule?
Do you remember the old neon tubes, which consumed a lot of energy to provide unpleasant lighting, which was flashing and sizzling? Thanks to LED strips, this type ofindustrial lighting is just a bad memory! LED technology today allows you to designer energy savings and user comfort. With equal lighting power, LED strips consume half less electricity as a conventional neon. Their ignition is instantaneous, they emit a pleasant and non -flashing light, and they are silent. 60cm LED strips to 150cm LED strips, the LED Neon Neon Controlling is wide and varied, making it possible to find the suitable product for each use and each room of the house. In addition, their very flat compact design makes them easy to install, even when the available space is reduced.
How to choose a neon LED rule?
In order to Choose the LED rule that best suits your need, it is necessary to take several criteria in account. Here they are.
The lighting power of the LED rule
The lighting power, expressed in Lumen (LM), must be more or less important depending on the use of the room and the surface to light: 500 lm/m2 for the worktop of the kitchen or for the Bathroom mirror, 200 lm/m2 for the ambient lighting of these rooms, 100 lm/m2 for a corridor or a staircase.
The dimensions of the rule
Depending on the available space and the length of the area to be illuminated, it is necessary to Choose between several LED rule sizes, such as 60cm, 90cm, or 120 or 150cm LED strips.
The lighting color of the LED Neon LED LED
About the lighting color, we recommend a warm white or neutral white in the living rooms, and rather a cold white in the places of passage or the areas which require very powerful lighting.
The protection index of the Neon Réglette
For an installation near a water point, it is necessary to opt for models with a protection sign high, iP65. THE conventional IP65 LED strips are waterproof Water projections, which allows them to be installed above a sink or sink, or in a semi-covered outdoor space.
The different types of Siluma catalog LEDs
It exists Several types of LED staff, whose length can range from 60 cm to 150 cm. Some of these strips have characteristics that destine them to specific uses: LED strips with detector, with emergency light, waterproof LEDs, or suspended LED regulations.
30cm LED strips
THE 30cm LED strips are the smallest strips in our catalog. They are perfect for lighting a small kitchen or being integrated into cupboards or dressing room.
60cm LED strips
THE 60cm LED strips are the shortest, and therefore the easiest to install in various places in the house. Their length corresponds to the width of most cooking plates. They also slide very easily under a high furniture of the kitchen, or above a bathroom mirror. 60cm LED strips can provide between 1,800 and 2,400 lm, for a consumption of 18 or 24 W.
90cm LED strips
A little longer than the previous ones, 90cm LED strips provide powerful lighting up to 3,600 lm. They can be used in the bathroom, or in the kitchen, for example to light the worktop. They are also well suited to lighting the garage or workshop.
120cm LED strips and 150cm LED strips
THE 120cm LED strips and the 150cm neon LED strips Allow a light flow of up to 5,000 lm, for a 50W consumption. They can be used as main lighting for a large kitchen, on the ceiling or in the form of suspended backgrounds. However, their power intends them rather to outdoor use, or in professional premises.
Suspended strips
Most of LED strips attach directly to the ceiling or on a wall. THE Suspended strips, on the other hand, are provided with a cable system allowing them to be suspended from the ceiling at a suitable height. Their elegant design allows them to be used as the main lighting of a room, for example above the central island of the kitchen or the dining table.
LED strips with detector
These schemes are equipped with a motion detector that causes their automatic ignition. THE LED strips with detector are particularly practical in places of passage such as the garage, the parking lot, the cellar or a corridor.
Waterproof LED strips
THE Waterproof LED Crossbings are IP65 class, which means that they are resistant to direct water projections and dust. They can thus be used in the immediate vicinity of water points, whether in the kitchen or bathroom, but also in a dusty area such as a cellar or workshop. Classic IP65 LED shots provide an easy and easy solution to install. T8 tube juices are removable so that you can change the lightening tube without replacing the entire installation.
LEDs with rescue light
It is important that some places remain lit even in the event of an electrical failure. It is possible thanks to LED strips with emergency light. In the event of failure of the power supply, they continue to provide sufficient lighting to allow the premises to be removed or access an electrical panel. IP65 class, they can be used inside the buildings, in the basement or outdoors.
T8 tube shots
THE 60cm T8 Tube Staff or the neon network for T8 90cm tube, and the 120cm T8 tube strips or 150cm are particularly indicated for intensive use. Indeed, the T8 LED tubes strips are made up of a support that includes power supply, and one or more T8 neon LED tubes. It is therefore possible to easily replace these neon lights when they have reached their maximum lifespan, without having to change the support and the food. THE 150cm T8 tube strips Or 120cm are mainly used in outdoor spaces or warehouse -type professional premises. Indeed, they provide particularly powerful lighting, up to 9,000 lm for 150cm T8 tube. Their electricity consumption is much lower than that of a classic neon: 20 W for the T8 60cm Tube shocks, up to 100 W for T8 150cm Tube Stations which accommodate two tubes of 50 W each.
Where to install a LED rule?
Available in several sizes and models, LED strips can be installed in various places. They are often found in the professional and industrial environment.
LED neon strips in a factory
Neon LED strips are ideal for optimally illuminating a factory. They provide an intense light essential for the safety and comfort of employees. These lights guarantee workers with better working conditions. LEDs are lighting solutions that reduce the energy bill. They can be used in the field of automotive construction, food and others. 150 cm models are recommended for lighting large industrial surfaces. With a power varying from 48 to 60 watts, these lights make it possible to illuminate your space in a homogeneous way. Regarding the lighting color, we advise you to choose between cold white and neutral white.
In a warehouse
You also find on Silumen.com Lighting contribution models to light your warehouse. Both waterproof and shock resistant, they are suitable for difficult environments. You can for example choose from the 120 cm lamps and the 50 Watts LED strips. These provide you with quality yield. LED technology allows them to give better energy performance and therefore helps you create a good working environment. The LED rule for warehouse has a fairly large lifespan. It is advisable to opt for a lighting color the cold white or neutral white.
Install LED luminous strips to illuminate parking
Neon LED strips are also ideal for lighting a parking lot. They make it possible to increase security in the parking lot and to strengthen the level of control of vehicles by drivers. Parking safety is improved thanks to continuous lighting without electrical consumption being increased. These slender lights do not heat up and have high energy efficiency. They can therefore provide a continuous sufficient lighting density (day and night). They also allow you to save money with regard to the cost of maintenance. Thanks to their long lifespan, these lamps hardly never require maintenance. They resist shocks very well.
In a garage or workshop
You can Buy an LED rule to light your garage or workshop. It provides 30% lighting higher than that of conventional neon tubes. It therefore allows you to have optimal lighting for the garage. With its great protection against water jets and dust, you are guaranteed to be able to use your lamp over a long time. When purchasing your slender lamp, opt for lighting whose temperature is between 5,500 and 6000 ° K. Cold white remains the most used color in garages and workshops, because it allows you to have a vision clear and precise.
The LED rule: an excellent kitchen lighting
This type of LED lighting also finds its place in the kitchen. This room in the house requires clear and efficient light. You find on Silumen.com the Best preconfigured LED strips to illuminate your kitchen table. You can have your lamps under the work plans to highlight your kitchen. Thanks to its length and its light diffusion capacity, the best LED rule allows you to unleash your kitchen in a homogeneous manner. The brightness that this LED lamp brings allows you to work more easily. It also brings a modern touch to the decor of this room.
Install a neon LED rule in the bathroom
This room in the house is also a Ideal place to install a light rule. You find a cheap LED rule for your bathroom lighting on Siluma.com. A 60 cm LED lamp is ideal for illuminating this room. It is waterproof enough to withstand all water jets. You can also choose from the 90 cm or 120 cm models.
How to install a neon LED rule?
I'Installation of an LED rule Stay simple and easy. The light rule can even be installed by an individual. Its installation takes place in several stages:
- The connection terminal: if you have never manipulated this type of lighting, you must take the time to locate the compartment on which the phase is attached and the one on which the earth is plugged in. It is also necessary to identify the compartment where the neutral will be connected.
- Connection: Each wire must be connected to the right compartment, then fixed securely using a screwdriver. The yellow and green thread corresponds to the earth, the brown to the phase and the blue in the neutral.
- Verification and ignition: When the assembly is well done, the connection terminal accommodates the wires on each side of the device. Once checked, now test your installation.
- Turn on the rule to see if the light will work. If it doesn't work, check the connections again.
- Choose the location of your cheap LED rule: it can be fixed to the wall or the ceiling. Use a wooden pencil and a ribbon meter to locate the ideal position of fixings.
- Drill the support and place the ankles: after having located the fixing positions, it is now necessary to pierce the support. You must then slide the ankles into the pierced holes and then fix the fixings. These must be vertical, because the rule will be directly slipped on it.
- Carry out the electrical connections and clip the rule: after installing the fixings, the electrical connections must be finished using the screwdriver before clipping the rule on its support.
Regarding installation equipment, you need the following tools:
- The LED luminous rule.
- A power cord.
- A suitable screwdriver.
- A hammer and pencil.
- A connection terminal.
Les questions les plus fréquentes
Here are the steps to follow to install a LED rule:
1 - Start by turning off the power supply from the part where you are going to install the LED rule. This will allow you to work safely.
2 - Remove the old rule or the existing ceiling light by loosening the screws which fix it on the ceiling.
3 - Install the fixing supports of the LED rule according to the manufacturer's instructions. Make sure they are solidly attached to the ceiling.
4 - Connect the wires from the LED rule to electrical wires on the ceiling. If you do not have an electricity experience, it is recommended to call on a professional for this step.
5 - Attach the LED rule to the fixing supports by tightening the screws.
6 - Connect the LED layer supply and light the electricity.
7 - Test the LED rule to make sure it works properly. If everything is in order, you can put the ceiling back in place.
It is important to carefully follow the manufacturer's instructions and comply with the electrical standards in force when installing an LED rule. If you do not have the necessary experience, it is recommended to use a professional to ensure the safety of your installation.
There are several items to take into account when choosing a LED rule:
The power : The power of an LED rule is measured in watts (W). The more powerful the rule, the more light it produces, but also the more electricity it will consume. Choose a power adapted to your brightness needs and the size of the room where you will install it.
The length : The length of the rule determines the number of LEDs it will include and therefore the amount of light it will produce. Choose a length suitable for the size of the room and your brightness needs.
Color temperature : the color temperature of an LED rule determines the color of the light it produces. Hot lights have a color temperature less than 3,000 k, while cold lights have a color temperature greater than 4,000 k. Choose a color temperature adapted to the atmosphere you want to create in the piece.
IP tightness and protection index : If you put your rule in a wet environment or likely to receive shocks (exterior, cellar, garage), favor a more robust and waterproof (IP65) contained rather than a non -waterproof (IP20).
Energy efficiency : To compare LED strips in terms of energy efficiency, you can look at the light efficiency index (LEI). The higher the index, the more energy -efficient the rule.
It is important to take the time to compare the different options and choose an LED rule that suits your needs in terms of power, length, color temperature and energy efficiency. Do not hesitate to ask a professional for advice if you have any doubts.
To choose a LED rule adapted to your garage, here are some items to take into account:
Power: it is recommended to choose a LED rule powerful enough to correctly light your garage. In general, a power of 30 to 50 W is sufficient for a medium -sized garage.
The length: the length of the rule determines the number of LEDs it will include and therefore the amount of light it will produce. Choose a length suitable for the size of your garage and your brightness needs. The most used models are 120cm and 150cm shifts.
The color temperature: the color temperature of the LED rule determines the color of the light it produces. Hot light shots have a color temperature below 3,000 k, while cold lights have a color temperature greater than 4,000 K. In a garage, It is recommended to choose a cold light rule, because it allows you to better see colors and details.
Energy efficiency: To compare LEDs in terms of energy efficiency, you can look at the light efficiency index (LEI). The higher the index, the more energy -efficient the rule.
The protection index: Choose a fairly robust and waterproof model for your use. An IP65 rule will be resistant to shock and humidity since it will be waterproof.
It is important to choose an LED rule that suits your needs in terms of power, length, color temperature and energy efficiency. Do not hesitate to ask a professional for advice if you have any doubts.
Il y a plusieurs éléments à prendre en compte lorsque vous choisissez une réglette LED :
- La puissance : la puissance d'une réglette LED est mesurée en watts (W). Plus la réglette est puissante, plus elle produira de lumière, mais aussi plus elle consommera d'électricité. Choisissez une puissance adaptée à vos besoins en luminosité et à la taille de la pièce où vous allez l'installer.
- La longueur : la longueur de la réglette détermine le nombre de LED qu'elle comportera et donc la quantité de lumière qu'elle produira. Choisissez une longueur adaptée à la taille de la pièce et à vos besoins en luminosité.
- La température de couleur : la température de couleur d'une réglette LED détermine la couleur de la lumière qu'elle produit. Les réglettes à lumière chaude ont une température de couleur inférieure à 3 000 K, tandis que les réglettes à lumière froide ont une température de couleur supérieure à 4 000 K. Choisissez une température de couleur adaptée à l'ambiance que vous souhaitez créer dans la pièce.
- L'étanchéité et indice de protection IP : si vous mettez votre réglette dans un milieu humide ou susceptible de recevoir des chocs (extérieur, cave, garage), privilégiez une réglettes plus robuste et étanche (IP65) plutôt qu'une réglette non étanche (IP20).
- L'efficacité énergétique : pour comparer les réglettes LED en termes d'efficacité énergétique, vous pouvez regarder l'indice d'efficacité lumineuse (LEI). Plus l'indice est élevé, plus la réglette est économe en énergie.
Il est important de prendre le temps de comparer les différentes options et de choisir un éclairage LED qui convient à vos besoins en termes de puissance, de longueur, de température de couleur et d'efficacité énergétique. N'hésitez pas à demander conseil chez Silumen si vous voulez acheter les réglettes lumineuses les mieux adaptées à vos besoins.
Voici les étapes à suivre pour installer une réglette LED :
- Commencez par éteindre l'alimentation électrique de la pièce où vous allez installer la réglette lumineuse LED. Cela vous permettra de travailler en toute sécurité.
- Retirez l'ancienne réglette ou le plafonnier existant en desserrant les vis qui la fixent au plafond.
- Installez les supports de fixation de la réglette LED selon les instructions du fabricant. Assurez-vous qu'ils sont solidement fixés au plafond.
- Branchez les fils de la réglette LED aux fils électriques du plafond. Si vous n'avez pas d'expérience en électricité, il est recommandé de faire appel à un professionnel pour ce pas.
- Fixez la réglette LED aux supports de fixation en serrant les vis.
- Branchez l'alimentation de la réglette LED et allumez l'électricité.
- Testez la réglette LED pour vous assurer qu'elle fonctionne correctement. Si tout est en ordre, vous pouvez remettre le plafond en place.
Il est important de suivre attentivement les instructions lors de l'installation d'une réglette et de tout autre éclairage LED pour assurer votre sécurité. Si vous n'avez pas l'expérience nécessaire, il est recommandé de faire appel à un professionnel pour assurer la sécurité de votre installation. Découvrez tous nos conseils et guides sur les réglettes LED.
La puissance en Watt des réglettes LED dépend de leur utilisation et de leurs dimensions. Habituellement, une réglette néon LED pour usage domestique présente des capacités variant entre 5 et 20 Watts. Pour des usages plus intensifs tels que l'éclairage industriel ou commercial, les capacités des réglettes LED peuvent s'élever à 40 Watts ou davantage. Il est crucial de sélectionner la puissance d'une réglette LED basée sur la luminosité requise et la superficie à illuminer. Pour un éclairage secondaire ou décoratif, une faible puissance est adéquate. Cependant, pour un éclairage principal ou professionnel, il est recommandé de choisir une réglette lumineuse LED de puissance supérieure. Lors de l'achat d'une réglette LED correspondant à vos exigences, prenez en compte ces critères et commandez en fonction.
