Outdoor LED ribbons
21 products
Like your interior, do you want to illuminate your terrace or your garden aisle? You can trust our collection of LED ribbons. Our outdoor LED banner allows you to make your installation. Thanks to the LED technology integrated into each outdoor LED strip that we offer, you can both save and enjoy optimal lighting. In addition, you should know that the Cheap waterproof outdoor led ribbon is provided with an IP65 or IP44 protection index. This type of outdoor light strip is therefore more or less resistant to solids and liquids. And if you want to complete your collection of lights, also browse our 220V exterior LED ribbons, our Waterproof 12V LED ribbons or our Waterproof 24V LED ribbons. Without forgetting the Waterproof transformers who accompany them.
Recently viewed
Nos clients ont aussi aimé
How to choose and install LED ribbons outside?
Discreet and yet so powerful, our external LED ribbons help you bring a contemporary touch to your entrance, terrace and facade. Buy an outdoor LED ribbon at Silumen Remember to discover a wide choice of articles allowing you to make all your lighting projects materialize.
LED ribbon: Design and modern exterior lighting
The external LED banner mainly between accentuation lighting, in order to create a typical atmosphere outside your home. Discreet and compact, this type of LED ribbon is also used for ornamental purposes. Its width being 8.10 or 12 mm, it brings unparalleled refinement to your lighting. Its diffuse light is also so fascinating and flats the eye. It also lends itself to an installation in difficult to access places.
Due to its length and flexibility, the professional outdoor led ribbon offers you many development possibilities. For example, you can buy a multicolored outdoor led ribbon in order to create a joyful atmosphere in your courtyard or under a pergola. Also use our Best outdoor LED ribbon In order to illuminate your exteriors and to enhance a place: the entrance porch, the veranda or the garden kiosk.
What protection index for an outdoor LED ribbon?
Like your exterior lighting is exposed to elements such as rain, dust, wind, snow and humidity, Invest in our best waterproof outdoor led ribbon. Several sealing levels, called Protection indices, are at your disposal. THE Watered outdoor LED bands with an IP44 protection index Support normal rains and are also protected from dust. They can be placed outside, in a place more or less covered by an awning or a roof advance.
Our Waterproof external LED ribbons with an IP54 index Support water splashes and can be placed in a wet environment. They are also waterproof. It is therefore possible for you to fix them in a place exposed to the heavy rains and the strong winds. Our IP65 exterior light strips are entirely tightly tight and fear the big showers. Install them along a staircase, on a facade, around a pool, etc.
What are the different types of outdoor LED banner?
It is advisable to choose the light decoration sparingly to bring a final touch to your exterior. These are accessories of capital importance and know that there are different types. If you have any doubts, don't forget to refer to the product description. When you want to buy an outdoor LED ribbon, your choice can be made depending on its tension: 12, 24 or 220 volts. here are the Different models of exterior LED ribbons of our online catalog.
12V waterproof external LED ribbons
Our Best very low voltage exterior LED ribbons 12 V guarantee safe use in humid places and frequently exposed to rain. To operate, they require a 200V 12V DC transformer. THE Waterproof 12V LED ribbons are offered in a roll of 5 meters at most, and can only be placed on installations measuring at most 10 meters.
24V waterproof outdoor led bands
The maximum length of a cheap outdoor led ribbon roll of 24 V is 10 meters. Waterproof, it is not afraid of rain or dust. You can use the Waterproof 24V LED ribbon To decorate a porch or to create bins with bright flowers. It does not require any amplifier, however the total length of the installation does not exceed 15 meters, in order to avoid the decreases in tension.
Professional exterior LED ribbons 220V
Our 220 V exterior lights enter applications that can measure up to 50 meters. THE 220V exterior LED ribbons are economical and effectively illuminate your facade or your garden borders. They are also offered in various colors to meet your expectations. Their installation is finally easy, since they operate without transformer.
The connected outdoor LED ribbon
Setting up a connected outdoor LED strip is adding a touch of modernity to your exterior. Indeed, this luminous ribbon can be positioned for any place, without the slightest fear of having a deterioration because of the weather. On the contrary, the connected LED banner is specifically designed to resist. Easily and quickly, you control the lighting thanks to the implementation of a Wi-Fi connection.
Therefore, you control the brightness of your Connected LED ribbon From your mobile phone. On some models, you find compatibility with certain services such as Google Home and Alexa. No matter the place in which you are, the Connected exterior led strip is very easily piloted. Ideal for defining a particular atmosphere before your arrival or to simulate a presence.
How to choose my waterproof outdoor LED band?
Depending on its length
Our exterior light bands measure 5, 10 or 50 meters, but it is by measuring the future location of your outdoor LED ribbon that you will know exactly the length to control. You can buy an external led ribbon per meter if your need is less than 5 m. Your installation will be well adjusted and moreover, you will not end up with LED strip drops. In principle, 12 V ribbons are offered in 5 -meter outdoor LED strips. They can be cut every 5 and every 10 cm. It is also possible to connect them for a tailor -made creation.
The waterproof led -led lighting color
The warm white Water LED ribbons, having a color temperature of 2,300 to 3,500 kelvins, are useful for composing a warm and cocooning atmosphere in your outdoor spaces. Their comforting and friendly lighting is perfect for illuminating a spa, living room or the terrace of a swimming pool. You can Buy an outdoor LED ribbon providing neutral white lighting For the lighting of the outdoor kitchen or the entrance. It also offers excellent visual comfort due to its natural light similar to daylight. Her lighting temperature is between 4,200 and 5,500 K.
With its temperature oscillating between 6,000 and 8,000 k, the cold white LED strip is distinguished by its bluish shade. It is also functional and allows you to perceive the colors well. It also brings a very modern touch to your light decoration. It perfectly illuminates a light arch, a parking lot, the children's hut, etc. In addition to white, waterproof exterior LED strips are available in other colors: red, green, yellow or even led ribbon or even Blue outdoor led band. They allow you to mount tailor -made light decorations, so do not hesitate to use them to create a festive atmosphere or to write colorful letters on a wall.
Our best exterior LED ribbons are not only monochrome, but can also be multicolored (or RGB). As the RGB Outdoor LED ribbon Change color according to your settings and desires, it is ideal for projecting a joyful light in front of your entrance and on your terrace, or to create light animations in the garden.
The type of LED of professional exterior LED ribbons Siluma
Siluma markets Outdoor LED ribbons using SMD 2835 and 5050 technology. THE SMD 2835 waterproof exterior LEDs are fitted with chips measuring 2.8 x 3.8 mm. Their luminous brightness is less compared to outdoor ribbons 5050, since their power is 0.15 W/LED. Place them in the areas to which you want to create a romantic or relaxing mood.
The external LED strips are formed by SMD 5050 LED crisps. They are 5 mm side and are distinguished by their powerful luminous brightness. They can also be multicolored thanks to their 3 light points to which the 3 primary colors RGB (red, green, and blue) are affected. Due to their power of 0.24 W/LEDs, the 5050 waterproof exterior LED ribbons offer a significant light flow. They can be placed in places requiring lively lighting such as the terrace, the entry, the garden furniture or any decorative element of the garden.
The number of LEDs of the exterior light banner
LED density influences light power of an outdoor led headband, its electricity consumption and its price. At Silumen, we listed inexpensive exterior LED ribbons with 30, 60, 120 and 180 LED per meter. Diodes can be arranged on 2 or 3 rows. The exterior LED strips 30 LED per meter are economical and diffuse a homogeneous light. Their electricity consumption varies between 6 and 7.2 watts/m, while their average brightness is 700 lumens/meter.
THE Bangs with 60 LED/M allow you to create uniform and energy -consuming lighting in your outdoor space. Their brightness is 1,200 lm, 3,350 lm, 6,000 lm/m for a power of 60, 70 and 72 watts. The SMD 2835 models provide lighting of 3,500 lm/m for a power of 30 watts. Our Professional exterior LED ribbons with 120 SMD 2835 LEDs per meter Provide a light flow of 1,200, 3,000 and 4,000 lm/m. Their electrical power is 60 watts. The waterproof external LED strips with 180 LED per meter produce a brightness of 1,200 lm/m for a power of 18 watts per meter.
What are the installation accessories for waterproof external LED ribbons?
Watered transformers for LED ribbon
THE Waterproof transformers are essential for a compliant installation of external LED ribbons of 12 or 24 V. Their choice is made according to their power: 20, 30, 40, 60, 100, 150, 200 Watts. As they display an IP67 protection index, they therefore benefit from total protection against dust and can be immersed up to 1 meter underwater. They support large rains as well as brief floods, to guarantee safe use of your installation.
Waterproof connectors
Waterproof LED ribbon connectors are useful for Connect an outdoor 220 -volts led -to -the -sector ribbon to the sector. Its mission is to transform the alternating current into direct current. During their assembly, you find two pins with a pointed end and a rounded end. The sharp end is integrated into the LED banner while the other end is inserted into the connector. This operation is done in a few moments. Once it is finished, you just have to drive the connector in a socket.
RGB controllers
These accessories are essential for Adjust the intensity and color of external LED ribbons. Remote -controlled models include a RGB controller and a remote control. They prove to be practical, since you will not need to move to diffuse monochrome or multicolored lighting on your terrace. Fashion touches also make it possible to intensify or sift light, to make it flash or to create a fade. The wired checks also have different buttons to manage exterior LED strips.
Aluminum profiles
THE cheap exterior led ribbons are perfect for protecting your installation and guaranteeing well -completed finishes. THE aluminum profiles Also take care of dazzling, ensuring better diffusion of light. You have the choice between built -in, flexible, dishes or angular, white, black, golden models. Their dimensions are also varied.
Where to install a luminous headband outside?
Watered outdoor LED ribbons are so versatile that you can place them everywhere.
Installing an outdoor led ribbon on the facade
It is important to treat the appearance of your facade and there are different ways to get there. For example, by carrying your sights on a luminous kit. This benefits from total compatibility for outdoor use and you give your imagination free rein. For example, by positioning the Outdoor led headband on the outline of your window To have more targeted lighting. But also on the roof advance in order to bring a most elegant light line. Not only do you enhance the facade of your home, but it is a way of moving away from the malicious people with subtle lighting.
Installing an outdoor led band on the terrace
The terrace allows you to spend unforgettable moments with your friends and family. Even if the days are long during the summer, you can continue the festivities in the evening. Rather than giving up your terrace, you can continue to entertain yourself thanks to the intelligent implementation of a Lighting for terrace, like an outdoor LED strip. Using a light strip in total adequacy with your environment, you sublimate your terrace and you create a warm atmosphere.
Installing an outdoor LED ribbon along a staircase
Do not hesitate to use professional illuminations to secure your outdoor staircase. Thanks to its accessories for ribbons, light allows you to go more easily when you are in darkness. Not only do you strengthen the security aspect of your outdoor staircase, but it is also a way to bring a touch of decoration. Especially since the outdoor LED ribbon is installed extremely easily.
How to effectively light your balcony?
Do not hesitate to redefine the general atmosphere of your balcony by treating the decoration and more particularly the lighting. To achieve your goal, it is essential to have a light that does not dazzle you. If possible modular to adjust the intensity compared to your activity on the balcony. Nothing like investing in a connected LED ribbon, in order to bring a touch of modernity and comfort to your balcony.
The installation of a LED ribbon in the garden
To establish an original decoration in your garden, while finding a balance with your environment, what would you say to deploy exterior LED ribbons that you put in place around the trees, along your garden shed, on a fence or on A border in order to define a luminous passage. This Garden lighting Give a bright, functional and decorative atmosphere.
Bring color to your swimming pool with suitable exterior LED ribbons
I'Pool lighting remains particularly important. At Silumen, we have a large stock of ribbons with many promotions to come and discover immediately. Easily, you will discover a completely suitable lighting to enhance your pool and thus obtain a most surprising light atmosphere.
How to install an outdoor LED ribbon?
Tools and equipment
For Prepare the installation of an outdoor led ribbon, we advise you to bring yourself beforehand a pair of scissors, one meter and a scale for work in height.
The precautions to be taken
First of all, don't forget to cut your power supply to your meter. When you have to work in height, it is recommended to work in pairs. The use of safety glasses remains recommended when you pierce in the wall.
The stages of installing an outside LED strip
Start with Define the length of the outer light tape Compared to its positioning. Then you use your pair of scissors to cut the headband in the appropriate place. The installation is carried out on fixing supports every 50 cm. It is essential to adapt it compared to the surface on which you will position the banner. The exterior LED ribbons of 220 volts are ready to operate as soon as their connector is in place. Their installation on the walls is done with fixing supports. These are placed every 50 cm approximately.
If you use a 12 or 24 V LED ribbon, it is imperative to set up a waterproof transformer. The connection of professional exterior LED ribbons of 12 and 24 volts requires the use of a Waterproof transformer 220V 12V or a 220V 24V waterproof transformer. You position it at the level of the aluminum profile. Once the latter's positioning is positioning, you install the LED strip after meticulous cleaning of the support to benefit from better grip. Do not forget to pass the wires to the end of the profile at the traffic jams. Regarding the support, simply use the dedicated hooks.
Maintenance
Regular dusting is essential using a flexible brush, to avoid the slightest degradation of the LED ribbon. If a maintenance operation is essential and you do not have the necessary skills, do not hesitate to request a quote from a professional.
Take advantage of all the advantages of Silumen outdoor led bands
Siluma exterior light strips are of remarkable quality. You enjoy a durable, aesthetic and easy to install product. Result: you have no difficulty creating the atmosphere that looks like you. There are many possibilities and to choose the most suitable ribbon, we invite you to immediately discover our catalog!
Les questions les plus fréquentes
{ "@Context": "https://schema.org", "@Type": "Faqpage", "Mainentith": [ { "@Type": "Question", "Name": "Can I cut my outdoor LED ribbon to shorten it?", "Accept in": { "@Type": "Answer", "Text": "Absolutely, it is possible to cut a Outdoor LED ribbon to shorten it. LED ribbons are often sold in standard lengths and can be cut at specific intervals to adapt to the desired length. However, it is important to follow the manufacturer's instructions to cut the LED ribbon safely. In general, LED ribbons are cut in specific places marked by cutting marks. To cut your 220V exterior LED ribbons For example, you can use scissors or a cutter, taking care to cut along the benchmarks. It is important to note that Some LED ribbons have sections that cannot be cut without damaging the ribbon, it is therefore important to check the manufacturer's instructions before cutting the ribbon.
" , { "@Type": "Question", "Name": "How to install an outdoor LED ribbon?", "Accept in": { "@Type": "Answer", "Text": "Installing a Outdoor LED ribbon May vary depending on the model and the manufacturer, but here are the general steps for the installation of an outdoor LED ribbon:
-
Clean the surface where you will install the LED ribbon to remove any dirt or dust.
-
Measure the length of the LED ribbon necessary for the surface to light.
-
Cut the LED ribbon with the desired length by following the manufacturer's instructions to cut it safely.
-
Remove the protective paper from the double-sided adhesive located on the back of the LED ribbon.
-
Apply the LED ribbon to the surface by pressing firmly to ensure good grip.
-
Connect the power cables to a compatible power source and test the LED ribbon to make sure it works properly.
It is important to note that Some external LED ribbons may require additional accessories such as connectors or junction boxes To guarantee a safe and efficient installation. It is also important to follow the manufacturer's instructions for the installation and use of the LED ribbon to avoid any risk of damage or fire.
Do you want to illuminate your kitchen? Here is How to install an LED banner in your kitchen.
" , { "@Type": "Question", "Name": "Are external LED ribbons waterproof?", "Accept in": { "@Type": "Answer", "Text": "Outdoor LED ribbons can be waterproof, but it depends on the model's model and classification (protection index). THE Outdoor LED ribbons Are often classified according to their level of protection against water and solids, with IP classifications ranging from IP20 (non -waterproof) to IP68 (waterproofing in water and dust). There are Waterproof 12V LED ribbons as well as Waterproof 24V LED ribbons, they have special coatings to protect electrical components from water and humidity.
It is important to check the IP classification of the LED ribbon before buying it to ensure that it is suitable for the expected use. If you plan to install the LED ribbon in a wet environment or exposed to the rain, it is Recommended to use a LED ribbon with high IP classification to avoid any risk of short-circuit or damage to electrical components. It is also important to follow the manufacturer's instructions for the installation and use of the LED ribbon to avoid any risk of damage or electrical danger.
" ]Absolutely, it is possible to cut a Outdoor LED ribbon to shorten it. LED ribbons are often sold in standard lengths and can be cut at specific intervals to adapt to the desired length. However, it is important to follow the manufacturer's instructions to cut the LED ribbon safely. In general, LED ribbons are cut in specific places marked by cutting marks. To cut your 220V exterior LED ribbons For example, you can use scissors or a cutter, taking care to cut along the benchmarks. It is important to note that Some LED ribbons have sections that cannot be cut without damaging the ribbon, it is therefore important to check the manufacturer's instructions before cutting the ribbon.
Installing a Outdoor LED ribbon May vary depending on the model and the manufacturer, but here are the general steps for the installation of an outdoor LED ribbon:
-
Clean the surface where you will install the LED ribbon to remove any dirt or dust.
-
Measure the length of the LED ribbon necessary for the surface to light.
-
Cut the LED ribbon with the desired length by following the manufacturer's instructions to cut it safely.
-
Remove the protective paper from the double-sided adhesive located on the back of the LED ribbon.
-
Apply the LED ribbon to the surface by pressing firmly to ensure good grip.
-
Connect the power cables to a compatible power source and test the LED ribbon to make sure it works properly.
It is important to note that Some external LED ribbons may require additional accessories such as connectors or junction boxes To guarantee a safe and efficient installation. It is also important to follow the manufacturer's instructions for the installation and use of the LED ribbon to avoid any risk of damage or fire.
Do you want to illuminate your kitchen? Here is How to install an LED banner in your kitchen.
Outdoor LED ribbons can be waterproof, but it depends on the model's model and classification (protection index). THE Outdoor LED ribbons Are often classified according to their level of protection against water and solids, with IP classifications ranging from IP20 (non -waterproof) to IP68 (waterproofing in water and dust). There are Waterproof 12V LED ribbons as well as Waterproof 24V LED ribbons, they have special coatings to protect electrical components from water and humidity.
It is important to check the IP classification of the LED ribbon before buying it to ensure that it is suitable for the expected use. If you plan to install the LED ribbon in a wet environment or exposed to the rain, it is Recommended to use a LED ribbon with high IP classification to avoid any risk of short-circuit or damage to electrical components. It is also important to follow the manufacturer's instructions for the installation and use of the LED ribbon to avoid any risk of damage or electrical danger.
L'installation d'un ruban LED extérieur peut varier en fonction du modèle et du fabricant, mais voici les étapes générales pour l'installation d'un ruban LED extérieur :
-
Nettoyez la surface où vous allez installer le ruban LED pour enlever toute saleté ou poussière.
-
Mesurez la longueur du ruban LED nécessaire pour la surface à éclairer.
-
Coupez le ruban LED à la longueur désirée en suivant les instructions du fabricant pour le couper en toute sécurité.
-
Retirez le papier protecteur de l'adhésif double-face situé au dos du ruban LED.
-
Appliquez le ruban LED sur la surface en appuyant fermement pour assurer une bonne adhérence.
-
Connectez les câbles d'alimentation à une source d'alimentation compatible et testez le ruban LED pour vous assurer qu'il fonctionne correctement.
Il est important de noter que certains rubans LED extérieurs peuvent nécessiter des accessoires supplémentaires tels que des connecteurs ou des boîtiers de jonction pour garantir une installation sûre et efficace. Il est également important de suivre les instructions du fabricant pour l'installation et l'utilisation du ruban LED pour éviter tout risque de dommages ou d'incendie.
Vous souhaitez illuminer votre cuisine ? Voici comment installer un bandeau LED dans votre cuisine.
Pour installer un ruban LED sur une terrasse, il est important de suivre une méthode structurée qui assure à la fois la durabilité et l'efficacité de l'éclairage. Chez Silumen, spécialiste en éclairage LED, vous trouverez tous les équipements nécessaires pour mener à bien votre projet. Voici les étapes à suivre :
1. Choix du ruban LED : sélectionnez un bandeau adapté à un éclairage extérieur. Les bandeaux LED extérieurs sont conçus pour résister aux intempéries et sont idéaux pour les installations en extérieur. Prêtez attention à leur Indice de Protection (IP), un IP44 sera adapté à une terrasse couverte, tantsis qu'un IP65 ou plus sera adapté a une terrasse en plein air.
2. Mesure de l'espace : mesurez précisément la longueur de la zone de la terrasse où vous souhaitez installer le ruban LED. Cela vous permettra de choisir la quantité nécessaire sans surcoût.
3. Test du système : après installation, testez le ruban LED pour vous assurer qu'il fonctionne correctement et uniformément le long de la terrasse.
4. Installation : commencez par nettoyer et sécher la surface où sera placé le ruban LED pour garantir une adhérence optimale. Appliquez le ruban en déroulant doucement et fixez-le solidement, en utilisant si nécessaire des clips de montage pour une fixation supplémentaire. Connectez ensuite le ruban à une source d'alimentation adaptée, en respectant les normes de sécurité électrique.
En choisissant des produits spécifiquement conçus pour l'extérieur chez Silumen, comme les rubans LED extérieurs, vous bénéficierez d'un éclairage de qualité et durable. Ces étapes simples vous aideront à réussir l'installation de votre éclairage de terrasse, en ajoutant une valeur esthétique et fonctionnelle à votre espace extérieur.
L'installation d'un ruban LED autour d'une piscine nécessite une attention particulière à la sécurité et à la résistance aux conditions humides. Chez Silumen, vous trouverez des solutions adaptées, comme les rubans LED extérieurs étanches, idéales pour ce type de projet. Voici les étapes à suivre pour installer correctement un ruban LED dans un environnement aussi exigeant :
1. Choix du ruban LED : sélectionnez un ruban LED extérieur étanche. Ces rubans sont spécifiquement conçus pour résister à l'eau et aux intempéries, ce qui est essentiel pour une utilisation autour d'une piscine. Chez Silumen, vous trouverez des options parfaites pour cet usage.
2. Mesure de la zone d'installation : avant de procéder à l'achat, mesurez précisément la zone autour de la piscine où vous souhaitez installer la bande LED extérieure. Cela vous permettra de déterminer la longueur de ruban nécessaire et d'acheter la quantité adéquate.
3. Préparation de la surface : assurez-vous que la surface où vous allez fixer le ruban LED extérieur est propre, sèche et lisse. Pour une meilleure adhérence, la surface doit être exempte de poussière, de graisse ou de toute autre contamination.
4. Installation électrique : planifiez soigneusement votre circuit électrique. Toutes les connexions électriques près d'une piscine doivent être parfaitement isolées et étanches pour éviter tout risque de court-circuit ou d'électrocution. Il est souvent conseillé de faire appel à un professionnel pour cette partie de l'installation.
5. Fixation du ruban LED : appliquez le bandeau LED extérieur en commençant par un bout de la piscine et progressivement autour du périmètre. Si le ruban possède un adhésif au dos, retirez le film protecteur et pressez fermement le ruban contre la surface. Pour des conditions extérieures et humides, il peut être judicieux d'utiliser des clips de montage supplémentaires ou un adhésif silicone pour renforcer la fixation.
6. Connexion et test : connectez le ruban LED étanche à votre source d'alimentation. Assurez-vous que toutes les connexions sont sécurisées et étanches. Testez le ruban pour vérifier son bon fonctionnement avant de finaliser l'installation.
7. Finitions et étanchéité : vérifiez que tous les joints et connexions sont bien étanches, en particulier les zones de coupe et de raccordement des rubans. L'utilisation de gaines ou de silicones spécifiques pour l'étanchéité peut être nécessaire.
En suivant ces étapes, votre installation de rubans LED autour d'une piscine sera non seulement esthétique, mais aussi sécuritaire et durable, créant une ambiance magnifique pour vos soirées au bord de l'eau. Chez Silumen, vous trouverez tous les matériaux nécessaires pour réussir ce projet d'éclairage extérieur avec assurance.
