220V COB LED Strip in 50 m Coil for Extended Linear Lighting

This long packaging corresponds to the product's series limit: a 50 m coil covers a complete run without any intermediate joints, eliminating the most vulnerable connection points prone to sealing defects and maintenance touch-ups. The 296 LEDs per meter using COB (Chip On Board) technology deliver a perfectly continuous line, with no visible dotted pattern under the diffuser. Direct 220V power supply eliminates the need for a driver and associated technical space. Cut at the designated marks, IP65 rating for damp environments and sheltered outdoor use.

Technical Details

• 10W per meter, totaling 500W for the 50 m coil
• 296 LEDs per meter with COB technology
• Light output of approximately 800 lm per meter, efficiency of 80 lm/W
• Direct 220-240V power supply, no driver required
• Maximum length of 50 m in series, achieved with a single coil
• IP65 protection rating, cut at designated marks
• Operating range from -20°C to +40°C

Features

• A 50 m run without intermediate joints or break points
• Continuous light line with no visible points along the entire length
• No driver to size or install within the structure
• Flexibility to follow cornices, returns, and curves
• Cut at designated marks to adjust layout

Installation

Gradually unroll the coil along the support, fix the strip with clips or in an aluminum profile, then connect the end to 220-240V. Since the coil reaches the maximum series length, no additional chaining is possible. Cut only at the designated marks, and seal the free end with a final end cap. Work must be done with power off.

Where to Use This COB LED Strip?

• Large retail spaces and extended commercial linear lighting
• Cornices and ceiling drops in office floors
• Halls, corridors, and long reception areas
• Marking of circulation paths and platforms
• Professional kitchens and damp technical rooms