Single-Circuit LED Track Kit + 4 Black GU10 Spotlights - 200 cm

Matte black finish for dark ceilings and exposed technical structures: the two-meter line blends into its mounting surface instead of drawing attention to it. Four adjustable heads and four GU10 lamps complete the package, all under a single product code.

Contents

• 1 black 2 m single-circuit track
• 4 black adjustable spotlight holders
• 4 LED GU10 9.5 W lamps (880 lm), supplied in the ordered color temperature
• Screws, ceiling fixings and track end caps included

Each section is supplied with its power connector and end caps: no additional accessories need to be sourced to power the track.

Technical details

• Total power: 38 W (4 x 9.5 W)
• Total luminous flux: 3520 lm (4 x 880 lm)
• Luminous efficacy: 93 lm/W
• Incandescent equivalent: 266W
• Power supply: 220 - 240V, 50-60Hz, alternating current
• Beam angle: 80°
• Color rendering: Ra 80
• Protection rating: IP20 (dry rooms)
• Total track length: 200 cm
• Lamp lifespan: ~25000h
• Lamp energy class: F
• Class I — CE & RoHs certification — 2-year warranty

Features

The single-circuit track connects all the holders to one circuit: the entire track switches on and off from a single control point. This is the quickest setup to connect when the electrical panel has only one lighting circuit.

The 4 holders are adjustable: each head swivels and tilts to direct the beam toward a facade, display or work surface. They slide freely along the full length of the track, allowing you to reposition them without tools when changing your merchandising layout.

The supplied GU10 lamps can be replaced like standard bulbs: the color temperature or power level of the installation can be changed without replacing the holders or track. Replacing individual lamps keeps the spare-parts stock needed on site to a minimum.

Please note: the supplied lamps are not dimmable. To adjust the brightness, replace them with dimmable GU10 lamps used with a compatible dimmer — the track and holders remain in place.

Installation

The track can be surface-mounted on the ceiling or wall-mounted using the supplied screws. Sections connect using the included connectors, and the track is then connected to the 220 - 240V mains using the power connector supplied with the track.

Installation must be carried out by a qualified electrician and comply with NF C 15-100. Switch off the power at the electrical panel before making any connections and check that the earth connection is continuous: the assembly is Class I.

Where can you use this track lighting kit?

Bars, restaurants, tasting rooms and event spaces: the black profile disappears against a dark-painted ceiling and draws attention to the illuminated areas. Two meters is enough to light a counter or display wall.