5.4W CCT Recessed LED Downlight, Aluminium, IP65, RE2020-Compliant, Insulation-Coverable
Designed for projects subject to RE 2020, this downlight with an aluminium trim delivers 600 lumens while consuming 5.4W, or 111 lm/W. Its insulation-coverable design allows direct installation beneath glass or rock wool without a protective enclosure, while its integrated terminal block preserves the airtightness of the wall. Three selectable color temperatures let you use the same stocked product in spaces with different needs.
Technical details
- Power: 5.4W — output: 600 lm — luminous efficacy: 111 lm/W
- Switchable CCT: 3000K / 4000K / 6000K — CRI Ra 80
- Beam angle: 40° — IP65 — Class II (double insulation, no protective conductor)
- 220-240V 50-60Hz power supply — dimmable — lifespan: ~50000h
- Ø8.05 x 4.95 cm — cut-out Ø60 mm — aluminium and ABS body
Features
- Can be covered with insulation: meets insulation continuity requirements for RE 2020 construction
- Terminal block included; wire connections require no terminal strip or additional connector
- Integrated CCT switch: one item in stock for corridors, offices, and damp areas
- Dimmable with a compatible dimmer for dimming scenarios and energy management
Installation
Isolate the circuit before carrying out any work. Drill a Ø60 mm hole in the suspended ceiling or plasterboard, connect the wires to the terminal block, select the color temperature, then engage the springs and clip the fixture into place. Wiring must comply with NF C 15-100. No safety clearance is required above the fixture thanks to its insulation-coverable design.
Where can you use this downlight?
- New homes and renovation projects subject to RE 2020, with insulated ceilings
- Damp areas: bathrooms, toilets, commercial kitchens (zone 2, depending on installation location)
- Commercial spaces: offices, corridors, stairwells, reception areas
- Retail, hotels, and restaurants, where illumination levels are determined in accordance with NF EN 12464-1
