5W IP67 recessed ground light for pathway marking
The most compact model in the series meets pathway-marking needs where ground space is limited: 80 mm overall diameter and a 74 mm cutout, delivering 334 lumens with a 30° beam. Its isolated driver and direct 220-240V connection eliminate the need for a remote power supply, simplifying cable runs along a line of multiple lights.
Technical details
- Power consumption 5W, luminous flux 334 lm, efficacy 67 lm/W
- Direct connection 220-240V, 50-60 Hz, integrated isolated driver
- Class I, earth connection required in accordance with NF C 15-100
- IP67 protection rating, permitted ambient temperature from -20 °C to +40 °C
- 30° beam, CRI Ra 80, non-dimmable product
- Overall dimensions ø 8 x 7.4 cm, cutout ø 7.4 cm, 10 cm cable tail
- Stainless steel, aluminum and PP body, L70B10 lifetime of approximately 30,000 hours
- CE compliance with directives 2014/35/EU, 2014/30/EU, 2011/65/EU, 2012/19/EU, EU 2019/2020 and EU 2019/2015
Features
The light consists of three parts: cover, inner body and mounting box, with the latter supplied with the product. This separation allows the boxes to be sealed in place during the structural work, while the light bodies can be installed only when the project is handed over, reducing the risk of breakage and theft. For maintenance, the body can be removed without breaking the seal. As the product is not dimmable, no dimmer or phase-cut detector should be installed on the circuit.
Installation
Isolate the power supply before carrying out any work. Prepare a recess to match the box dimensions, feed the power cable through it, then seal it in place with mortar or a suitable fixing material, observing the correct installation orientation. Provide a drainage bed beneath the box: IP67 protects against temporary immersion, not prolonged standing water. Connect the inner body to the cable, including the earth, insert it, reposition the top section and check that it is secure before restoring power. Use a waterproof connection suitable for outdoor use.
Where can this recessed ground light be used?
Pedestrian paths, shared residential driveways, patios, paved areas, outdoor steps and areas around buildings. For outdoor, ground-recessed installation only; not for permanent immersion or areas where water can collect.
