U-Shaped Single-Circuit LED Track Kit + 14 Black GU10 Spotlights - 800 cm

Fourteen spotlights spread across eight meters of black track on a single circuit: the U-shaped configuration can be installed above a central island or around the perimeter of a counter. All the connecting hardware is included, including the two 90° corners and the two straight connectors.

What’s included

• 3 black 2 m single-circuit tracks
• 2 black 1 m single-circuit tracks
• 2 black single-circuit straight connectors
• 2 black single-circuit 90° corner connectors
• 14 black adjustable spotlight holders
• 14 9.5 W GU10 LED bulbs (880 lm), supplied in the ordered color temperature
• Screws, ceiling fixings, and track end caps included

Each section comes with its power connector and end caps: no additional accessories are needed to power the track.

Technical details

• Total power: 133 W (14 x 9.5 W)
• Total luminous flux: 12320 lm (14 x 880 lm)
• Luminous efficacy: 93 lm/W
• Incandescent equivalent: 798W
• Power supply: 220 - 240V, 50-60Hz, alternating current
• Beam angle: 80°
• Color rendering: Ra 80
• Protection rating: IP20 (dry locations)
• Total track length: 800 cm
• Bulb lifespan: ~25000h
• Bulb energy class: F
• Class I — CE & RoHs certified — 2-year warranty

Features

The single-circuit track groups all the holders on one circuit: the entire track can be switched on and off from a single control point. This is the quickest configuration to connect when the electrical panel has only one lighting circuit.

All 14 holders are adjustable: each spotlight pivots and tilts to direct the beam toward a facade, display, or work surface. They slide freely along the entire track, allowing you to rearrange them without tools when changing your merchandising layout.

The included GU10 bulbs can be replaced like standard bulbs: the color temperature or power level of the installation can be changed without replacing the holders or track. Replacing bulbs individually reduces the spare parts inventory that needs to be kept on site.

Please note: the supplied bulbs are not dimmable. To adjust brightness, replace them with dimmable GU10 bulbs paired with a compatible dimmer—the track and holders can stay in place.

Installation

The track can be surface-mounted on the ceiling or wall-mounted using the included screws. Sections connect using the included connectors, and the track is then connected to the 220 - 240V mains using the power connector supplied with the track.

Installation must be carried out by a qualified electrician and comply with NF C 15-100. Switch off the power at the electrical panel before making any connections and check the continuity of the earth connection: the system is Class I.

Where can you use this track lighting kit?

Dining areas, reception halls, and technical spaces: the eight-meter U-shaped track frames a central island or perimeter walkway. Centralized control is compatible with an existing switch, with no need to add a circuit at the electrical panel.