Classic Flush-Mounted Two-Way Wall Switch 10A - White

A two-way variant from the Luna range, this module must be installed in pairs to allow control of the same light point from two different locations. Its symmetrical frame with soft lines and generous button in white finish blend equally well into both classic interiors and more contemporary decor.

Technical Specifications

Modular format 81 x 81 x 14 mm, powered at 250V / 50Hz with a nominal current of 10A. Minimum flush-mounting depth required: 27 mm. Push-in terminals accept conductors from 0.75 to 2.5 mm², both rigid and flexible. Silver welded contacts, IP20 protection rating.

Product Advantages

The mechanism is based on three terminals — one common phase and two travelers — to perform traditional cross-wiring between the two control points. The silver welded contacts ensure reliable and stable switching throughout the product’s lifespan. The module supports modular mounting up to 5 units on the same plate, offering great configuration flexibility. Its visible frame with soft lines comes in 4 coordinated colors to match all decorative styles.

Installation

The installation must be done in pairs on the same circuit. In each flush-mounting box (minimum depth 27 mm), connect the phase to the common terminal and the two traveler wires to the corresponding numbered terminals. The cross-wiring between the two switches enables independent control from each end of the circuit. Then secure the mechanism with self-retracting claws or screws depending on the support, and clip on the Luna frame and white button.

Recommended Applications

This two-way switch is naturally suited for stairwells (control at the bottom and top), long corridors equipped with two control points at each end, through bedrooms (entrance + bedside), or any room with two separate accesses. An essential for everyday comfort, both in residential layouts and commercial projects. Product guaranteed for 2 years.