Simple Flush-Mounted Two-Way Switch 10A 250V - Black

Control the same light point from two different locations with this single-pole two-way switch. Always installed in pairs, it is the go-to solution for all double-access setups: stairwells, long corridors, or rooms with two doors, where the lighting naturally follows movement.

Technical Specifications

Powered at 250V / 50Hz, rated current of 10A, glossy black casing measuring 81 x 81 x 43 mm. It fits into any standard box with a minimum depth of 29 mm. Its high-resistance thermoplastic body and IP20 rating make it suitable for dry indoor spaces.

Product Benefits

The mechanism includes three terminals — one common phase and two travelers — to ensure cross-control between the two control points. The automatic insulation-piercing terminals accept rigid or flexible conductors from 0.75 to 2.5 mm². The mounting combines spring clips and screw holes to fit every type of box. Note: this mechanism works exclusively in pairs on the same circuit to perform its two-way function.

Installation

First, turn off the main power at the panel. On the first switch, connect the phase to the common terminal and the two traveler wires to their respective terminals. Repeat the wiring symmetrically on the second two-way switch, located at the other end of the circuit. Finish by securing each mechanism in its flush-mounted box and snapping the black finish plates onto both locations.

Recommended Applications

This two-way switch is especially suited for stairwells (control at both the bottom and top), long corridors with two access points, through-rooms, or open living areas with multiple entrances. A real everyday advantage: no more back-and-forth trips to the main switch, lighting is always within easy reach.