3-Phase LED Track Kit + 4 White GU10 Spotlights - 200 cm

Three-phase power provides three independent circuits on a single track: the four included spotlights can be assigned to separate controls according to the chosen layout. The complete kit includes two meters of track, four holders and four GU10 lamps.

What’s included

• 1 white 2 m three-phase track
• 4 white adjustable spotlight holders
• 4 LED GU10 lamps, 9.5 W (880 lm), supplied in the ordered color temperature
• Screws, ceiling fixings and track end caps included

Each track section comes with its power connector and end caps: no additional accessories are needed to power the track.

Technical details

• Total power: 38 W (4 x 9.5 W)
• Total luminous flux: 3520 lm (4 x 880 lm)
• Luminous efficacy: 93 lm/W
• Incandescent equivalent: 266W
• Power supply: 220 - 240V, 50-60Hz, alternating current
• Beam angle: 36°
• Color rendering: Ra 80
• Ingress protection rating: IP20 (dry areas)
• Total track length: 200 cm
• Lamp lifespan: ~25000h
• Lamp energy rating: F
• Class I — CE & RoHs certified — 2-year warranty

Features

The three-phase track provides three independent circuits on a single profile. Each holder is set to the desired circuit when clipped into place, allowing general lighting and accent lighting to be controlled separately without running an additional line.

All 4 holders are adjustable: each spotlight pivots and tilts to direct the beam toward a wall, display stand or work surface. They slide freely along the full length of the track, allowing you to reposition them without tools when changing your display.

The included GU10 lamps can be replaced like standard bulbs: the color temperature or power level of the installation can be changed without replacing the holders or track. Replacing individual lamps also reduces the spare-parts inventory you need to keep on site.

Please note: the supplied lamps are not dimmable. To adjust the brightness, replace them with dimmable GU10 lamps paired with a compatible dimmer—the track and holders can remain in place.

Installation

The track can be surface-mounted on the ceiling or wall-mounted using the supplied screws. The sections connect using the included connectors, and the track is then connected to the 220 - 240V mains using the power connector supplied with the track.

Installation must be carried out by a qualified electrician and comply with NF C 15-100. Switch off the power at the breaker panel before making any connections and check that the earth connection is continuous: the entire assembly is Class I.

Where can you use this track lighting kit?

Retail corners, showrooms, offices and reception areas: the three circuits let you assign dedicated controls to end-of-aisle displays while keeping general lighting independent, all on a single two-meter track.