Black 3-Phase L-Shaped LED Track Kit + 5 GU10 Spotlights - 300 cm

A three-meter L-shaped track in a black finish, equipped with three independent circuits: ideal for lighting a store entrance and its window return with distinct atmospheres. The corner connector and screws are included.

What's included

• 1 black 2 m 3-phase track
• 1 black 1 m 3-phase track
• 1 black 90° 3-phase corner connector
• 5 black adjustable spotlight holders
• 5 GU10 9.5 W LED bulbs (880 lm), supplied in the ordered color temperature
• Screws, ceiling fixings and track end caps included

Each track section comes with its power connector and end caps: no additional accessories need to be purchased to power the track.

Technical details

• Total power: 47.5 W (5 x 9.5 W)
• Total luminous flux: 4400 lm (5 x 880 lm)
• Luminous efficacy: 93 lm/W
• Incandescent equivalent: 333W
• Power supply: 220 - 240V, 50-60Hz, alternating current
• Beam angle: 36°
• Color rendering: Ra 80
• Ingress protection rating: IP20 (dry indoor areas)
• Total track length: 300 cm
• Bulb lifespan: ~25000h
• Bulb energy class: F
• Class I — CE & RoHs certified — 2-year warranty

Features

The 3-phase track provides three independent circuits on a single profile. Each holder is set to the desired circuit when clipped into place, allowing general and accent lighting to be controlled separately without running an additional line.

All 5 holders are adjustable: each head swivels and tilts to direct the beam toward a façade, display or work surface. They slide freely along the entire length of the track, allowing the layout to be changed without tools when merchandising changes.

The included GU10 bulbs can be replaced like standard bulbs: the color temperature or power level of the installation can be changed without replacing the holders or track. Replacing bulbs individually limits the spare parts that need to be kept on site.

Please note: the supplied bulbs are not dimmable. To adjust brightness, replace them with dimmable GU10 bulbs paired with a compatible dimmer - the track and holders can remain in place.

Installation

The track can be surface-mounted on the ceiling or wall-mounted using the supplied screws. The sections connect with the included connectors, then the track is connected to the 220 - 240V supply using the power connector supplied with the track.

Installation must be carried out by a qualified electrician and comply with NF C 15-100. Switch off the power at the electrical panel before making any connections and check earth continuity: the unit is Class I.

Where can you use this track lighting kit?

Shops, galleries, hotels and reception areas with an angled layout: circuit zoning separates window lighting from interior lighting, using a single physical track and a single connection point.