Motion Detector with Dimmer and DIP Switch IP20

Add a comfort dimension to automatic detection with this micro-detector that combines a 5.8 GHz microwave sensor and integrated dimmer function. The lighting gradually increases in intensity for a more pleasant illumination in living or transitional spaces.

Technical Details

Power supply 230V AC 50 Hz, consumption 0.9W. Controls up to 600W LED via integrated dimmer function. Frequency 5.8 GHz, detection speed 0.6 to 1.5 m/s. Front range 1 to 8 m, optimal installation height 2 to 8 m. Polycarbonate housing 78 x 45 x 25 mm. Operating range -20°C / +50°C. IP20 for dry indoor use.

Features

The integrated dimmer gradually adjusts output power according to DIP switch settings, from 30% ambient lighting to full brightness. 4 DIP switches to set sensitivity, light threshold (2 / 10 / 50 / 2000 lux), and timer (5 s to 30 min). Angle 360° / 180°, push-in connectors for quick wiring. Compatible with dimmable LED.

Installation

Install the detector behind a light partition, inside a luminaire, or above a non-metallic false ceiling. Connect phase, neutral, and dimmed output (note: compatible with dimmable LED only, check the LED datasheet). Set the DIP switches, close, and test.

Where to Use This Detector with Dimmer?

Living rooms, bedrooms, residential staircases, day/night transition areas where gradual light increase improves comfort. Suitable for dimmable LED ambient lighting only. Manufacturer’s warranty 3 years.