Flush-Mounted Single Wall Switch 10A - Matte White

On a construction site, every control point needs to be quick to install and built to last. This flush-mounted single-pole light switch meets installers’ needs: automatic terminals, claw fixing and a slim square faceplate that sits flush with the wall. The matte white finish does not reflect light from fixtures and blends in with any wall covering.

Technical details

• AC, voltage 220 - 240 V, frequency 50/60 Hz.
• Rated current 10 A, single-pole switch (breaks one conductor only).
• IP20 rating, for dry indoor locations only.
• Overall dimensions 8.1 x 8.1 x 1.4 cm, weight 55 g.
• Cutout diameter 6 cm, compatible with boxes from 5 to 10 cm.
• Minimum required box depth: 27 mm.
• Quick-connect screwless terminals (the conductor locks in with a simple push) for solid or stranded wires from 0.75 to 2.5 mm².
• Plastic body and faceplate, matte white finish.
• Operating temperature from -20 °C to +40 °C.
• CE & RoHS certification, 2-year warranty.

Features

• Tool-free, screwless connection: the stripped conductor locks into the terminal with a simple push, significantly reducing installation time at each control point.
• Dual mounting options: self-retracting claws or direct screw mounting to the box, depending on the surface on site.
• Compatible with a 1- to 5-gang faceplate, in horizontal or vertical configurations, for aligning multiple mechanisms on a single strip.
• Integrated springs secure the faceplate to the mechanism without play, for a lasting fit even after removal.
• Wide square rocker switch, operable with an elbow or the back of the hand when your hands are full.

Installation

Switch off the power at the electrical panel and check that the circuit is de-energized before starting work. Strip the conductors to the specified length, then insert them into the automatic terminals: a firm push is all it takes to ensure contact. Fit the mechanism into the 6 cm diameter flush-mounting box, making sure it is at least 27 mm deep, then secure it using the self-retracting claws or screws if the box allows. Clip on the faceplate and rocker switch, restore power and check the switch.

Where can you use this single switch?

• Offices, open-plan workspaces and meeting rooms, in both new builds and replacement installations.
• Retail stores and showrooms, where the matte surface prevents unwanted reflections under accent lighting.
• Hotels and managed residences: bedrooms, landings and corridors.
• Dry commercial premises: changing rooms, break rooms, archives and storage rooms.
• Housing developments delivered at scale, where quick connections save time across hundreds of control points.