Black Power Connector for Recessed Three-Phase Track

Power Connector for Black Recessed Three-Phase Track

Five conductors connect here: three phases, neutral and the protective conductor. This end piece determines how the entire system will operate, since the chosen wiring order determines which circuit controls each group of spotlights.

Technical details

• 220 - 240V AC power supply
• Compatible with the range's recessed three-phase tracks
• Black finish
• IP20 rating (indoor use, no protection against water)
• CE & RoHs certified
• 2-year warranty

Features

• Interface between the 220 - 240V mains supply and the recessed three-phase module
• Three phases on separate terminals, plus neutral and protective conductor
• End mounting, closing off the end of the track
• Powers the entire line and the modules connected downstream
• Black finish to match the modules and connectors

Installation

Isolation is mandatory. Each phase must be protected by its own circuit: note which circuit corresponds to each terminal and record it in the as-built documentation; this will be needed to assign the spotlights. Tighten to the specified torque, check the continuity of the protective conductor, then insert the piece into the end of the module.

Where should you use this power connector?

One power supply per three-phase line, even when several modules are connected together. It is installed at the end connected to the existing electrical wiring. Dry indoor environments, IP20.