220V 12V IP67 36W DC 3A Transformer
A 12V strip installed outdoors, under a facade or along a pathway, needs a power supply that can withstand dust and water. This converter steps down the 220-240V mains supply to regulated 12V DC, up to 3 A, in a fully resin-sealed housing.
Technical details
- Power: 36W
- Input voltage: 220 - 240V, 50-60Hz
- Output voltage: 12V DC
- Maximum current: 3 A
- Protection rating: IP67
- Dimensions: 12.5 x 3.5 x 2 cm
- Operating temperature: -25°C to +45°C
- Lifespan: approximately 25000 hours
- CE & RoHs certification, 2-year warranty
Features
- Regulated 12V output that absorbs mains fluctuations and eliminates flickering
- IP67 resin-sealed housing, protected against dust and temporary immersion
- Connects via input and output wires, with polarity marked
- Compact 12.5 cm size, suitable for installation in a profile or technical enclosure
Installation
Calculate the load before wiring: add up the strip's power consumption per meter, multiply by its length, and allow a 20 percent margin. At 36W, this gives around 3 meters of 9.6 W/m strip with the margin, or 6 5W spotlights connected in parallel. With the power off, connect the mains on one side and the 12V output on the other, observing polarity. Installation should be carried out by a qualified electrician.
Where can you use this transformer?
Patio, pathway, outdoor staircase, damp room, commercial kitchen, display window: anywhere the power supply cannot be housed in a dry enclosure. It is also suitable for indoor use when compact size matters more than price.
