220V LED ribbon connectors

17 products

    You want to optimize the use of your coils of 220V LED ribbons ? Opt for our wide range of 220V LED ribbon connectors And choose a perfect value for money with Silumen. Whether for personal or professional use, these 220V LED ribbon connectors may be of great use to you. Sublimate your lighting using our 220V Silumen LED ribbon connectors easy to install and use. Ranging from Ruban connectors Going through electrical protective covers or different fixing media, everything you need for your 220V LED strips are available in this category. Then it will always be possible to control your lighting via our 220V controller remote controls or our many Profile bars 220 In order to optimize your pleasures as much as possible. What does the time of the evening, the occasion or the atmosphere you want, the use of these LED ribbon connectors will allow you to be completely controlled. Do not delay on order!

    17 products
    Recently viewed

    Connect your 220V LED ribbon with ease thanks to our 220V quality connectors


    You finally gave in to the essential LED ribbon, but don't necessarily know how to do it to make the installation? As it was provided to you by Silumen following your purchase, the 220V LED strip that you have in hand does not necessarily have all the elements required for its electrical connection and its commissioning. To do this, you need a 220V LED ribbon connector. This small accessory is inseparable from the installation of a compatible LED strip. It guarantees the power supply to your LED ribbon to allow you to enjoy its beautiful colorful decorative lighting. Find the LED ribbon connector at Siluma which will complete your installation and finalize the connection of your LED lighting.


    What is a 220V LED ribbon connector?


    LED ribbons are everywhere. In the homes of individuals as well as in professional stores and premises, these light bands that use the technology of the electroluminescent diode have stormed interior decoration, providing modern and stylish lighting. In addition to being simple to mount, the LED bands bring a new dimension, both efficient and resolutely decorative, to the atmosphere of your pieces. Silumen helps you adopt this new trend by offering you a wide selection of 220V LED ribbons, perfect for equipping your interior and lift your room lighting. However, that's not all! You are also invited to discover in our full catalog the accessories required for the installation of your LED banner, starting with The 220V LED ribbon connector, an essential.But what is it?

    Concretely, a LED ribbon connector is an essential accessory for the installation and electrical connection of your LED banner. Without that, a LED ribbon would be reduced to a simple banner, unable to fulfill its primary function: that of lighting your interior. Indeed, the 220V LED ribbon electrical connector allows the electricity luminaire to power. It is generally in the form of a short electric cable formed on both sides of a power intake and a clip to which the tip of the LED band connects. Otherwise, the 220V LED ribbon connector also means the accessory that serves as a connection between two LED ribbons, in the event that you want to create a major installation by putting two or more LEDs ended. The fact remains that connectors for 220V LED ribbon are inseparable from the 220V LED strips.


    The different connectors for LED ribbons available on Silumen.com


    Just as we offer a wide variety of 220V LED strips, Silumen also provides you with a wide range of connectors, enough to satisfy all your possible needs. Find in our catalog of appropriate lighting and accessories The best 220V LED ribbons connectors to perfect and optimize your installation domestic.

    Depending on their function and the type of LED ribbon to be equipped, the connectors are available in two different versions:

    • On the one hand, you have Electrical connectors for 220V LED ribbon : This accessory plays the role of power and allows the LED banner to be connected to the 220V sector to use its lighting light. After all, the LED ribbon is supposed to serve as a luminaire, a function that it can only be fulfilled with an electrical connector, like the RGB connector and its remote control.
    • On the other hand, you have the connectors that serve as a connection between two LED 220V ribbons: if the LED banner you have is not long enough and you have another on hand, the 220V LED ribbon connector Allows you to connect them so that they form a single chain of LED ribbons.

    The 220V 2835 LED ribbon connector


    Before'Buy your 220V LED ribbon connector, make sure the compatibility of the accessory with the type of LED ribbon you have. Naturally, it must be, in this case if, a connector suitable for a banner that works in 220V. The type of chip with the 220V LED ribbon also determines your choice of connectors. Thus, if you need to connect two LED ribbons which both embark an SMD 2835 chip (a reference to the size of the individual LEDs: 2.8mm x 3.5mm) or 3014 (3.0mm x 1.4mm), the 2835/3014 LED ribbon connector is the ideal option. For information, this is a type of single and general monochrome led ribbon.


    The 220V 5050 LED ribbon connector


    Have you chosen a 220V LED banner with a SMD 5050 chip to embellish your interior with beautiful vivid colors? The LED 5050 ribbon (5mm x 5mm LED lights) has LED lamps made up of a set of three light points, an appearance that allows this model to widen the choice of color in terms of lighting. However, to be able to take advantage of it, you will need to get a separately Electrical connector for 220V 5050 LED ribbon. This connector, made up of an electrical outlet and a clip, can power up to 50 meters of LED 5050 band.


    The 220V double -row 220V ribbon connector


    Have you preferred to opt for a double row 220V LED strip to generate more light in the room? The 220V LED ribbon electric connector that you need to order must be chosen accordingly. For a double row banner, Silumen offers you the Electrical connector specially designed for 220V 2835 LED row row. This power accessory is perfectly suited to an SMD 2835 LED banner which, instead of embarking a simple row of 60 LEDs per meter, provides you with a double row of color LEDs for a total of 120 light points per meter.


    The use of a 220V LED ribbon connector


    220V LED ribbon connectors are available for cheap On the Silumen.com site, enough to finalize the installation of your LED banner without further emptying the portfolio. Once the electrical or link connector has been acquired, all you have to do is install the set:

    • Specify the location of your LED band intelligently so that one of the two tips of the headband ends near an electrical outlet. You can always, if necessary, provide an extension or a multi -power to simplify access of the banner to the power supply.
    • Glue the LED headband to the decided place.
    • Then connect the tip of the ribbon which is around the electrical outlet with the LED ribbon connector. To do this, grab the serrated picot provided with the connector you bought and drive it into the raw tip of your 220V LED ribbon. Depending on the type of ribbon you have on hand, it can be a p poot (with 2 tips) or a 4 tips picot, especially for RGB LED ribbons.
    • Once the picot is in place, all you have to do is drive it into the metallic poles of the connector. The tips of the Picot overlap perfectly in the connector. Remember to drive them well to the end to guarantee the passage of the current (and to avoid any malfunction).
    • Therefore, all you have to do is connect the electrical outlet to test the operation of the ribbon. If the LED band does not light up, simply reversed the picot connection at the connector to correct the polarity.

    The connection of a connector that will serve as a connection between two LED 220V ribbons is carried out in the same way, except that the connection is done at the other tip of the LED strip. Press the picot into the other tip, connect it to one side of the double connector, do the same with the second LED ribbon by connecting it to the other end of the connector and voila! In the event that the second LED does not light up, check the polarity in terms of connecting the connector.

    .