24V LED ribbon transformers
23 products
Optimize the use of your 24V LED ribbons is one of your priorities? Discover our wide range of 220V 24V transformers For LED ribbon which will allow you to feed your LED lighting devices according to their power level. Our selection is particularly varied, because it is made up of transformers whose powers vary from 12W to more than 150W for some of them. Depending on your most specific needs, we have identified in a single range what you need and it should be noted that they are compatible with the LED 24V ribbons Available on Silumen. They also serve to adapt them to a domestic voltage of 220V. Many 24V transformers for LED strip of our selection are IP67 certified, This protects them from dust infiltrations and even humidity. Guarantees for 2 years to guarantee their long-term reliability, rejoice on their robust side. Our selection also has other accessories such as Amplifiers for LED strips in order to strengthen their performance. To improve your experience with our LED ribbons, we also invite you to discover our RGB 24V controller remote controls as well as our 24V LED ribbons connectors.
Recently viewed
Nos clients ont aussi aimé
Finalize the installation of its 24V LED ribbon by buying an adapted transformer
LED bands are the new trend of the moment in terms of modern and stylish lighting. Silumen offers them in a variety of models in 24V version. However, to function as it should be, your 24V LED ribbon needs to be supplied by a continuous 24V tension. You will therefore have to equip your installation with a transformer which allows you to connect your lighting to the level of a 220V sector outlet.
Because Siluma ensures the quality of your Lighting Installation from A to Z, we offer you for sale of Transformers for LED 24V ribbon Custom designed to optimize lighting and secure the operation of your LED bands.
An essential accessory to enjoy its decorative lightingF
The power supply of LED ribbons requires attention. Quality LED ribbons, sold by Silumen, are all models operating at low voltage, an aspect that guarantees the secure use of the luminaire. It is 24V LED ribbons, a model that requires a 24V continuous current to operate optimally. However, for information, the electric current delivered as is by the distribution network is an alternating current of 220V. To install a 24V decorative LED strip in your interior, you will have to Equip you with a 24V 220V transformer for LED ribbon.
THE Transformer for LED 24V ribbon is an essential accessory to buy In parallel with a 24V LED ribbon. Its role in the installation of your decorative LED ribbon is crucial for the proper functioning of the lighting. Indeed, the current mini-transformator converts the 220V voltage sinusoidal current supplied by the 24V low-voltage continuous current sector for the LED ribbon. To fulfill its role, this accessory thus takes place between the supply of food and the 24V LED ribbon. Compact and discreet, the LED ribbon transformer does not interfere or unravel your installation and on the contrary constitutes an addition of safety to perfect the yield of your LED lighting.
The waterproofing of the 24V LED ribbon transformer
Just like the lights, Buy a 24V LED ribbon transformer requires paying attention to the sealing index (IP protection index) accessory. Silumen offers this accessory for 24V LED ribbon in two different versions, depending on the transformer IP and the installation you plan to make of it:
- The transformers for LED 24V IP20 ribbon: On the scale of the protection indices, IP20 constitutes the minimum level defined by the International Electrotechnical Commission. This index means that these Cheap LED ribbon transformers are quite resistant to dust and solid bodies. These transformers are adapted to an interior installation, ideally in a room without humidity, by the total absence of resistance to liquids.
- Transformers for LED 24V IP67 ribbon: the model of 220V 24v current transformer certified IP67 is perfectly suited to outdoor use. Indeed, the protection index 67 means that the transformer is certified dust and water resistant. So you can freely Order transformers for 24V LED ribbon IP67 for an outdoor luminaire arrangement or in a damp room indoors.
The power power of the 24V LED ribbon transformer
THE Choice of the best transformer for 24V LED ribbon for your lighting installation Considers the lighting and energy consumption of your LEDs into consideration. The transformer must ideally be compatible with the electric power of your decorative installation. For information, the light efficiency of an LED ribbon is defined by its electrical power. Depending on the number of LEDs in the ribbon in 1 meter, the amount of electricity consumed by the entire band (expressed in watts) varies.
The 24V LED ribbon transformer to install is chosen accordingly to make the most of your LED band. For a given LED lighting power, select a similar or slightly higher power transformer to complete your layout. Our catalog notably includes transformers of:
- 60W: our models of 60W 220V 24V transformer are suitable for low voltage LED ribbons. This transformer generates a current intensity of 2.5A and is suitable to supply an LED strip which requires less than 60W.
- 72W: the power of the transformers for Silumen LED ribbon gradually increases as our 72W 24V current transformers, perfect for an installation of power luminaire less than or equal to 72W.
- 80W: We also have 820V 24V transformers of 80W For your LED ribbons.
- 100W: Your lighting installation reaches 100W? Do not be afraid ! Silumen has something to complete your layout with its 100W 24V LED ribbon transformers.
- 150W: The longer your LED band, the more LED lights and the greater lights are the generated electrical power. Of the Small current transformers of 150W You are offered by Silumen with this in mind.
- 200W and 500W: For your power needs, we have 200W LED 24V ribbon transformers and other models going far beyond, such as 500W current processors, guaranteed without overheating, without overload and without risk of overvoltage.
The connection of a 24V LED ribbon transformer
The LED ribbon transformer is an accessory that completes the low voltage installation of your lighting. To do this, he must take place between the LED strip and the source of food. Starting from the principle that you have already calculated the electrical power of your LED ribbon (depending on the cut length) and chosen The LED ribbon transformer to install, You will need:
- Connect the LED ribbon to the transformer while paying attention to the direction of the current. The LED ribbon is connected to the output of the transformer, generally marked with the mention DC (direct run or direct current). Once the output has been identified, unscrew the two poles of the transformer and then connect the red wire to the positive pole and the blue wire to the negative before tightening everything.
- Connect a power supply cord (sold separately or supplied with the transformer depending on the model) at the input of the transformer. Just connect the phase (L) on the red thread of the cord and the neutral (n) on the blue wire.
- Connect the socket on a sector and test the functionality of the LED ribbon.
.
