Silumen Pro+ design office

Send your plans, get back a complete lighting study

Architect's plans, sections, even a rough plan: our experts calculate the layout, illuminance levels and renderings for your project, then hand you a file ready to price.

  • Free for professionals
  • No commitment
  • An expert calls you back within 24 working hours
  • NF EN 12464-1 and 12464-2 standards
Annotated architect's plans and false-colour illuminance simulation

The right lighting, calculated before it is installed

A study prevents the two costliest mistakes on a job: the under-lit room that has to be redone, and the over-equipped room that wastes energy.

Compliance

Required levels, zone by zone

Average illuminance, uniformity and minimum level calculated to NF EN 12464-1 for indoor and NF EN 12464-2 for outdoor, with a compliance table for each zone.

Juste dimensionnement

The right number of light points

Not too much, not too little: the layout is set to the target, with enough power reserve to adapt the use without changing luminaires.

Savings

Energy use under control from the design stage

Installed power, W/m² and annual consumption all costed. When several solutions are equally valid, we compare them: standalone solar or mains-connected, detection, dimming.

Visualisation

See your project before the work starts

Daytime and night-time 3D renderings to approve the ambience with the client, the architect or your customers.

Illuminance measurement in a warehouse before relamping

Your project, just as it is

No need for a perfect file. Send whatever you have to hand, and we will fill in the gaps with you over the phone.

  • Site or floor plans PDF, DWG or DXF, even at planning permission stage
  • Sections or heights Ceiling height, eaves and ridge height, desired mounting height
  • Use of each zone Workshop, office, storage, walkway, car park: to set target levels
  • Photos or renderings The existing installation for a renovation, the architect's views for a new build
  • Specifications Technical specifications, client requirements, specified luminaires
  • Site constraints Required controls, connection, budget, schedule

Files too large for the form? Paste a WeTransfer or Drive link.

How it works

Four steps, one single contact from the first call to the quote.

  1. 1 You submit your project Plans, photos and a few details via the form, in two minutes.
  2. 2 An expert calls you back Within 24 working hours, to clarify the uses, target levels and constraints.
  3. 3 We calculate and simulate Layout, point-by-point calculation, isolux curves and 3D renderings.
  4. 4 You receive your file Full PDF study and detailed quote with Silumen product references, within the agreed timeframe.

What your file contains

A clear PDF, easy to read for both the client and the electrician, with the exact products to order.

  • Project summary and comparison of solutions
  • Calculation basis: standards, heights, maintenance factor
  • Dimensioned layout plans and isolux curves
  • Compliance tables by zone: Em, Emin, U0, W/m²
  • Daytime and night-time 3D renderings
  • Bill of materials, installation and quote with Silumen product references

Extracts from a real, anonymised 10-page study: workshops, roads and parking areas.

Night-time 3D rendering
Night-time 3D renderingLighting signature for gable ends, poles and parking areas.
Indoor isolux curves
Indoor isolux curves751 m² workshop, 12 battens at 8 m: 358 lx average, U0 0.69.
Outdoor layout
Outdoor layout23 poles, levels calculated at ground level across 9 zones.
Daytime 3D rendering
Daytime 3D renderingIntegration of poles and luminaires into the site.

From warehouses to car parks, we study every project

Indoor, outdoor, new build or renovation: every use has its target levels, and we apply them zone by zone.

Industry and logistics

Industry and logistics

Workshops, warehouses, loading docks: high bays and battens sized for high ceilings.

Offices and commercial buildings

Offices and commercial buildings

Workstations, open-plan spaces, reception areas and meeting rooms, for genuine visual comfort.

Shops and showrooms

Shops and showrooms

Showcasing products, shop windows and tracks, with good colour rendering.

Roads, car parks and public spaces

Roads, car parks and public spaces

Solar or mains-connected poles, compliant with light pollution regulations.

Multi-unit residential

Multi-unit residential

Lobbies, walkways, communal areas and outdoor surroundings.

Programmes neufs

Programmes neufs

From the planning permission stage, to price the lighting at the right time.

Who carries out your study

Lighting enthusiasts who know every luminaire

Your study is carried out by the team that designs and manufactures the Silumen Pro+ range. We know the actual luminous flux, optics and settings of every luminaire, so we can size accurately rather than over-specify.

The file leads to a quote for available products, shipped from our warehouse in Gennevilliers.

Design office workstation with an illuminance simulation on screen
Your details
Your project
Project nature *
Your plans and documents

    * Required fields. Free study for professionals only, carried out with Silumen luminaires and subject to approval of your file.

    Frequently asked questions

    Is the study really free?

    Yes. It is free for professionals (installers, design offices, architects, project owners, site managers, public authorities), with no obligation to buy. It is carried out with luminaires from the Silumen range and is subject to approval of your file.

    Quels fichiers dois-je envoyer ?

    A PDF plan is enough to get started. DWG or DXF files save us time on dimensions. If possible, add a section or the ceiling height, and the use of each zone. The form accepts 10 files and 15 MB in total; beyond that, paste a WeTransfer or Drive link.

    My project is not finalised yet, is that a problem?

    No. A planning permission drawing or a rough plan is enough for a preliminary study. Values are then confirmed at the execution stage, using the photometric files of the selected luminaires.

    How soon will I receive the study?

    An expert will call you back within 24 working hours to scope the project. The delivery date for the study is agreed with you at that point, depending on the size and complexity of the project.

    Which standards do you apply?

    NF EN 12464-1 for indoor workplaces, NF EN 12464-2 for outdoor workplaces, and the French decree of 27 December 2018 on light pollution for outdoor lighting. Calculations are made point by point, with a maintenance factor.

    Can you compare several solutions?

    Yes, for example standalone solar lighting versus mains-connected lighting, or two families of luminaires. For each one, you receive the levels achieved, the energy consumption and the equipment cost.

    What happens to my plans?

    They are used only to produce your study and quote, and are not shared with third parties.

    Plans gathering dust in a folder?

    Send them as they are. We will tell you exactly how many luminaires to install, where, and at what wattage.

    Envoyer mon projet