Ten Ø64 ground marker lights, 1 W each, for low-power pathway marking

On an outdoor lighting project, the number of points can quickly exceed ten, and the combined power consumption affects circuit sizing. This pack includes ten 1 W recessed ground spotlights: 10 W in total to light an entire pathway, with a single product reference to order and a consistent light color across the whole batch.

Technical details

Power per unit: 1 W; luminous flux: 79 lm per point (79 lm/W, equivalent to an 8 W incandescent bulb), or 790 lm for the pack. Mains supply: 220 - 240V, 50/60 Hz AC, with no remote driver. 30° beam angle, IP67 rating (complete protection against dust and temporary immersion), Class I device with a protective earth conductor required. Dimensions: Ø 6.4 cm, with a recess depth of 7.4 cm; silver-colored stainless steel housing. Stated lifespan: ~30000 h, energy class G, CE & RoHs compliant, 2-year warranty.

Features

At 1 W per point, the load remains negligible even along a long line: the power budget allows many marker lights to be connected to an existing outdoor circuit. The narrow 30° beam prevents glare for users and stray light onto façades. The batch comes in one color temperature of your choice (2300K - 3500K, 4000K - 5500K, or 6000K - 8000K), ensuring consistent visual marking. Non-dimmable product: do not install a dimmer on the circuit.

Installation

First plan the layout of the ten points and the spacing, then isolate the circuit before starting any work. Drill Ø 6.4 cm holes, allowing extra depth for a gravel drainage bed under each unit; the IP67 rating does not cover prolonged standing water. Run the power cable in conduit suitable for outdoor use, use watertight connections, connect live, neutral, and earth, then fit the spotlights flush with the surface. Check earth continuity at each point during commissioning; installation must be carried out by a qualified electrician.

Where should you install this pack?

Pedestrian paths in residential complexes and condominiums, around hotels and restaurants, along parking areas, on outdoor steps at public buildings, around pools, and on terraces at commercial premises. For outdoor, ground-recessed installation only, outside areas of permanent immersion.