IP67 220V 1W 30° LED Recessed Outdoor Ground Spotlight
An in-ground recessed marker light must withstand foot traffic, cleaning, and standing water. This 1W stainless steel spotlight meets all three requirements with an IP67 rating and connects directly to 220 - 240V, with no transformer to house along the pathway.
Technical details
- Power: 1 W
- Luminous flux: 79 lumens
- Luminous efficacy: 79 lumens per watt
- Incandescent equivalent: 10 W
- 220 - 240V - 50/60 Hz power supply, alternating current
- Beam angle: 30°
- IP67 protection rating (dust-tight and protected against temporary immersion)
- Electrical insulation class: Class I
- Service life: 30000 hours
- Materials: stainless steel and PP plastic
- Diameter 6.4 cm - height 7.4 cm
- Not compatible with a dimmer
- CE & RoHs certification
- 2-year warranty
Features
- In-ground installation, flush with the surface
- IP67 rating: dust-tight and protected against temporary immersion
- 30° beam for guidance without glare
- Direct 220 - 240V connection, no transformer required
- Stainless steel body, Class I appliance
Installation
Drill a hole to match the body diameter and allow enough depth for its 7.4 cm height, with a bed of gravel beneath the fixture to drain water. Run the cable through conduit and connect the live, neutral, and protective earth wires: this is a Class I appliance, so grounding is mandatory. Isolate the power supply before working; connection must be carried out by qualified personnel.
Where can you use this recessed spotlight?
Commercial walkways, patio edges, pool surrounds, outdoor steps, parking entrances, and pedestrian paths. The IP67 rating withstands rain and jet washing, but the fixture is not designed for permanent immersion.
