Bulkhead Wall Light with Motion Sensor and IP44 15W 90lm/w Light
In apartment building corridors, common areas and service rooms, manual control is the main source of wasted energy: lights stay on because there is no timer switch. This 15W bulkhead light has a built-in occupancy sensor and dusk sensor, allowing you to automate a light point without adding a remote sensor or modifying the existing circuit.
Technical details
Direct connection to a 220 - 240V, 50-60Hz circuit. Power consumption: 15W for a luminous flux of 1350 lumens, giving a luminous efficacy of 90 lm/W. Color temperature: 4000K, color rendering index Ra 80, beam angle 120°. Diameter: 19 cm, thickness: 4.8 cm. IP44 rating (protection against water splashes) and IK03 mechanical resistance rating. Class II appliance (double insulation), so it can be connected using two conductors without a protective conductor, in accordance with NF C 15-100. Power factor 0.5: when installing multiple units on the same circuit, account for the apparent power when sizing the circuit.
Features
Detection is provided by a PIR (passive infrared) sensor with a range of 3 meters, combined with a dusk threshold set between 13 and 18 lux that prevents the light from switching on while there is sufficient natural light. The switch-off delay is set to 3 minutes after the last detection. Declared service life: 50000 hours according to the L70B10 protocol (luminous flux depreciation of 30% or less by the end of this period). 2-year warranty, CE & RoHs compliance.
Installation
Isolate the circuit and check that it is de-energized. Drill according to the supplied mounting plate, insert wall plugs, then screw the plate to the mounting surface. Open the junction box cover and connect the live (L) and neutral (N) wires to the corresponding terminals, using 2 x 0.5 to 2 mm² cable. Lock the fixture onto its mounting plate, then restore power. Keep the lens field of view clear of obstructions and do not point it toward a heat source or an area with constant foot traffic, as this may cause false triggering. Installation must be carried out by a qualified professional.
Where can you use this bulkhead wall light?
Shared areas in apartment buildings, landings, stairwells, walkways, technical rooms, storerooms, laundry rooms and restrooms. Its IP44 rating makes it suitable for damp areas and zones 2 and 3 of bathrooms, as well as sheltered outdoor areas. In commercial and institutional settings, it offers a simple solution for meeting requirements for automatic lighting control in intermittently occupied rooms.
