COB LED Strip AC 296 LED/m 220V 10W/m IP65 25M - Red

Red COB LED Strip, 25 m Coil with Strong Visual Presence

Red is the most demanding color in terms of continuity: on a discontinuous line, the eye immediately detects the rhythm of the diodes. With 296 LEDs per meter assembled using COB (Chip On Board) technology, the line remains solid along its entire length, even in close-up view behind a diffuser. The connection is made directly to 220V, without the need for a driver or technical volume. 25 m coil, IP65 rating, chaining limited to 50 m in series.

Technical Details

• Lighting color: monochrome red
• 10W per meter, totaling 250W for the 25 m coil
• 296 LEDs per meter with COB technology
• Approximately 800 lm per meter, efficiency of 80 lm/W
• Direct power supply 220-240V, no driver required
• Maximum length of 50 m in series, IP65 rating
• Cuttable at marked points, operating range from -20°C to +40°C

Features

• Dense and continuous red output, with no visible diode rhythm
• No power block needed within the circuit
• Flexible for dressing corners, returns, and furniture
• Operates from -20°C to +40°C with IP65 rating
• Approximate lifespan of 20,000 hours

Installation

Position the strip along the layout, secure it with adhesive clips or in a profile, then connect the end to 220-240V. Cut only at the designated marks and seal the free end with a final cap. Observe the 50 m series limit. Work must be done with power off.

Where to Use This Red COB Strip?

• Bars, nightclubs, and nightlife spaces
• Scenographies, theaters, and studios
• Showcases and displays with strong visual impact
• Counter and commercial furniture dressing
• Events and temporary installations