COB LED Strip 5m Cut-to-Length 24V 10W/m IP20 8mm 570lm/m

COB LED Strip 5m Cut-to-Length 24V 10W/m IP20 8mm 570lm/m

In interior design, the most common complaint about linear lighting is visible spotting behind a diffuser. COB (Chip On Board, LED chips embedded beneath a continuous layer of phosphor) technology eliminates this: the light is uniform along the entire length, even when viewed directly.

Technical details

• Power: 10 W per meter, or 50 W for the 5 m roll
• Luminous flux: 570 lumens per meter, or 2850 lumens in total
• Luminous efficacy: 57 lumens per watt
• 24V DC power supply
• COB technology - 400 LED chips per meter
• Color rendering index CRI Ra 90
• Printed circuit board width: 8 mm
• Length: 500 cm
• IP20 rating (indoor use, no water protection)
• CE & RoHs certification
• 2-year warranty

Features

• Continuous line with no visible spots, even without a diffuser
• Can be cut to length at centimeter intervals between two solder pads
• CRI Ra 90, faithfully renders materials and textiles
• 24V low voltage: limited voltage drop over long lengths
• Powered by a 220V - 24V transformer, not included

Installation

Cut the strip to the required length between two pads, degrease the surface, and press it firmly along its entire length. Connect it to the 220V - 24V transformer, observing the marked polarity. For long lengths, power it from both ends to maintain uniform brightness along the strip. Mounting it in an aluminum profile improves heat dissipation and service life.

Where can you use this LED strip?

Retail displays, hotel coves, the underside of counters, display windows, gondola shelving, and bedroom headboards. IP20 rating: for dry locations only, away from wash areas and outdoor spaces.