Spot transformers

Order transformers for LED spots to operate your lights optimally

The use of low -voltage LED spots requires the use of a transformer. The direct connection to the electricity network would immediately lead to their destruction. If your LED bulbs work under a voltage less than 220V, you have no choice but to direct yourself towards the implementation of a current transformer so that your lights work properly.

The current transformer is an essential accessory for the connection of LED spots. In a word, it is used to stabilize and reduce current tension so that your lights can ensure their role properly. It is therefore clear that your LED spot will not be able to perform and functional if it is not provided with a transformer for LED spot. Discover our range of LED spot transformers And order the one you need at the best price on our site.

What is an electric transformer?

The current transformer is a conversion system that allows you to modify the voltage and the intensity of the electric current without changing its frequency. It is simply a passive device that has been designed to convert a current through magnetic induction. In other words, a transformer allows you to standardize electric current and at the same time stabilize it and protect your device. This is a very important aspect for safety.

You will understand, a transformer is really necessary for the proper functioning of your Interior LED spots. To this end, Silumen offers you all kinds of LED spot transformers Transforming 220V current into lower voltage depending on the equipment you use. Take your own and benefit from a compliant and suitable electrical installation.

Why use transformers for your LED spots?

We all know that the voltage of a domestic electrical installation generally used in all households is the220V. We can therefore connect a 220V bulb directly to the network. But in the case of a LED bulb with a lower voltage like that intended to equip a spot, this far too large power will grill it, hence the need for a transformer installed upstream.

For example, Our 220V 60V IP20 18W LED transformer Converts a voltage of 220V to adapt it to the 60V lamps. The goal is to reduce the 220V mains tension at the desired level compared to the supplied bulb. This is the reason why a transformer must be installed in the circuit, on the one hand to protect the bulb and on the other to allow it to function properly. Quickly browse the Silumen site for Buy a spot transformer Suitable for your lights so that they can operate properly without any risk. If you have planned to install 40V spots, equip yourself with our 220V 40V IP20 12W LED transformer

Transformers intended to optimize and secure your lighting

To ensure the proper functioning of your lighting system and guarantee the effectiveness of your low -voltage LED spots, you are strongly advised to buy a transformer that will convert the voltage of electricity from 220V to 12V, 24V, 40V , 60V or 80V. The latter will be used to vary the network voltage to adapt it to the operating voltage used by the bulbs to which it is connected. In this way, Our best current transformers for spots Adapt the tension of your spot to that of your power system to ensure their compatibility.

To secure your electrical installation, be sure to opt for our 220V LED transformer of 12V IP20 . This is the ideal accessory to allow you to benefit from safe lighting safely. You also need this type of transformer to protect your electrical installation against short circuits and overheating.

Choose and install your LED spot transformer

Check the power of your LED spots

Use our Cheap transformers for spots In complete safety requires paying attention to the choice of proper power. Of course, voltage is a crucial parameter to take into account, but the number of watts is just as much. The power in watts will make it possible to determine the number of bulbs that the LED transformer is able to support.

Must thereforecalculateThe power required by your installation (by multiplying the power in watts of the bulbs which will be powered by the transformer). The total obtained, you will add a safety margin of 10 %. And since you will probably not find a transformer delivering exactly the desired power, you will choose the modelthe closestupwards. For example, to feed 5 5W LED spots, you will need 5 x 5 = 25 + 2.5 of safety margin (10%), this gives 27.5 Watts. According to this calculation, you will need an LED transformer of 30 W.

Connect your current transformer to the electrical circuit

We would like to recall that some bulbs operate directly on the 220V current and can thus be directly connected to your power circuit. But other LED bulbs like those of spots do not need such power, but only 12V, for example. In this case, it is imperative to use a LED transformer. If you already know how to set up an LED luminaire, you will have no difficulty in setting up our current transformer for spots. Furthermore, when you acquire, you will directly find a detailed diagram to tell you about the meaning of connection.

The first thing to do is to cut the current and check that your transformer is not likely to be exposed to water projections (unless you have opted for a waterproof transformer). Then connect power supplies to the sector and your transformer using conventional screw dominoes. You can of course connect several spots to a single power supply and therefore to a single LED transformer. To do this, make sure that the total power of the bulbs used does not exceed that of the power supply because the minimum power required must be respected for correct operation.