U-Shaped Single-Circuit LED Track Kit + 14 White GU10 Spotlights - 800 cm
Eight meters of track divided into three runs and fourteen adjustable heads: this U-shaped setup covers a full-length area or runs around a sales floor. Connectors, end caps, and mounting hardware are included, eliminating the risk of installation delays due to a missing accessory.
What’s included
- 3 white 2 m single-circuit tracks
- 2 white 1 m single-circuit tracks
- 2 white single-circuit straight connectors
- 2 white single-circuit 90° corner connectors
- 14 white adjustable spotlight holders
- 14 9.5 W (880 lm) GU10 LED bulbs, supplied in the ordered color temperature
- Screws, ceiling mounts, and track end caps included
Each track section comes with its power connector and end caps: no additional accessories need to be sourced to power the track.
Technical details
- Total power: 133 W (14 x 9.5 W)
- Total luminous flux: 12320 lm (14 x 880 lm)
- Luminous efficacy: 93 lm/W
- Incandescent equivalent: 798W
- Power supply: 220 - 240V, 50-60Hz, alternating current
- Beam angle: 80°
- Color rendering: Ra 80
- Protection rating: IP20 (dry indoor areas)
- Total track length: 800 cm
- Bulb lifespan: ~25000h
- Bulb energy class: F
- Class I — CE & RoHs certification — 2-year warranty
Features
The single-circuit track groups all the holders on one circuit: the entire track switches on and off from a single control point. This is the quickest setup to connect when the electrical panel has only one lighting circuit.
All 14 holders are adjustable: each head swivels and tilts to direct the beam toward a facade, display, or work surface. They slide freely along the full length of the track, allowing you to rearrange them without tools when merchandising changes.
The supplied GU10 bulbs can be replaced like standard bulbs: the color temperature or power level of the installation can be changed without replacing the holders or track. Replacing individual bulbs also reduces the spare parts you need to keep on site.
Please note: the supplied bulbs are not dimmable. To adjust the light intensity, replace them with dimmable GU10 bulbs and use a compatible dimmer — the track and holders can stay in place.
Installation
The track can be surface-mounted on the ceiling or wall-mounted using the supplied hardware. Connect the sections with the included connectors, then connect the track to the 220 - 240V supply using the power connector supplied with the track.
Installation must be carried out by a qualified electrician in compliance with NF C 15-100. Switch off the power at the electrical panel before making any connections and check earth continuity: the system is Class I.
Where can you use this track lighting kit?
Sales floors, showrooms, exhibition halls, and workshops: the U-shaped loop lights an entire area from a single power feed. Check light level distribution against NF EN 12464-1 when the installation serves permanent workstations.
