COB LED Strip 50M AC 296 LED/m 220V 10W/m IP65 - Blue

Blue COB LED strip, 50 m coil with no intermediate connections

For perimeter marking or facade highlighting, every joint is a potential point of moisture ingress and a possible maintenance issue during operation. This 50 m coil is the product's maximum series length: the run can be installed in one continuous length, with no intermediate connection to seal or document. The 296 LEDs per meter with COB (Chip On Board) technology provide continuous blue light along the entire length, while the direct 220V power supply eliminates the need for a driver and its enclosure.

Technical details

• Light color: monochrome blue
• 10W per meter, or 500W for the 50 m coil
• 296 LEDs per meter with COB technology
• Approx. 800 lm per meter, 80 lm/W efficacy
• Direct 220-240V power supply, no driver required
• Maximum series length of 50 m, supplied on a single coil
• IP65 protection rating, cut at the designated marks
• Operating temperature range of -20°C to +40°C

Features

• A single continuous 50 m run, with no intermediate connection to seal
• Continuous blue light, with no dotted effect on reflective surfaces
• No driver or power supply enclosure to install
• Flexible enough to follow corners and curves
• Approximate lifespan of 20,000 hours

Installation

Gradually unroll the coil along the mounting surface, secure the strip with clips or in an aluminum profile, then connect the end cap to 220-240V. As the coil reaches the maximum series length, no further linking is possible. Cut only at the designated marks and seal the free end with an end cap. Work with the power off.

Where can you use this blue COB strip?

• Long perimeter marking
• Highlighting facades and sheltered outdoor structures
• Large nightlife venues and performance spaces
• Technical set designs and immersive experiences
• Indoor pool edges and aquatic facilities