COB LED Strip 50M AC 296 LED/m 220V 10W/m IP65 - Red

Red COB LED strip, 50 m coil for large-scale installations

For large-scale projects—event venues, long commercial façades, stage-design routes—multiple connections increase installation time and weaken the overall setup. This 50 m coil covers the entire run in one continuous length, reaching the product's maximum series length. The 296 LEDs per meter using COB (Chip On Board) technology produce a dense, perfectly continuous red light with no perceptible LED pattern, and direct 220V power means no driver is needed.

Technical details

• Light color: monochrome red
• 10W per meter, or 500W for the 50 m coil
• 296 LEDs per meter using COB technology
• Approximately 800 lm per meter, efficacy of 80 lm/W
• Direct 220-240V power supply, no driver required
• Maximum series length of 50 m, provided by a single coil
• IP65 protection rating, cut at the designated marks
• Operating temperature range from -20°C to +40°C

Features

• One continuous 50 m length: faster installation and fewer potential weak points
• Dense, continuous red light with no perceptible LED pattern
• No power supply unit needed in the circuit
• Flexible enough to wrap around corners, returns, and furniture
• Lifespan of approximately 20000h

Installation

Gradually unroll the coil along the surface, secure the strip with clips or in an aluminum profile, then connect the plug to 220-240V. As the coil reaches the maximum series length, no additional strips can be connected. Cut only at the designated marks and seal the free end with an end cap. Disconnect power before installation.

Where can you use this red COB strip?

• Large event venues and nightlife spaces
• Long storefronts and commercial runs
• Stage designs, studios, and performance venues
• Wrapping long counters and furniture
• Temporary installations with high visibility