Tunnel LED Strip 200M 2835 220V AC 9W/m IP65 120 LED/m (4 linkable 50M strips + power supply)

200 m tunnel LED strip kit — 4 x 50 m strips connected + 220V power supply

This kit covers very large perimeters with 4 x 50 m strips connected end to end and a single mains power supply. L's direct 220V power supply eliminates the need for multiple low-voltage transformers and minimizes connections across 200 meters, making it ideal for industrial facades, parking lot guidance lighting, and long driveways. The IP65 PVC sheath protects the SMD2835 chips in damp conditions and covered outdoor areas, providing a continuous line of 120 LEDs per meter. Lighting 200 m from a single point is exceptional for this type of strip.

Technical details

• Kit of 4 x 50 m strips + 1 mains power supply — 200 m total
• Power 9W per meter — 900W (alternating 1 m lit / 1 m without LEDs)
• Total output 60200 lm — 120 LEDs per meter — SMD2835 chips — CRI Ra 90
• Direct 220-240V, 50-60Hz power supply — alternating current (AC)
• IP65 protection rating (dust-tight and protected against water jets)
• PVC sheath — 18 x 7 mm profile — connectable up to 250 m
• Can be cut every 1 m — lifespan ~20,000h — 2-year warranty

Features

• 4 strips connected in a single run: fewer joints around large perimeters
• Direct 220V power supply without a low-voltage transformer
• IP65 waterproofing for covered outdoor areas and damp rooms
• Can be cut every 1 m at the marked points — CRI Ra 90

Installation

Unroll and secure the 4 strips along the route, connect them end to end, then connect the supplied 220V power supply; seal the free end with an end cap. For long runs, observe the manufacturer's maximum permissible wattage per power supply point and add multiple injection points if necessary. Disconnect the power before connecting.

Where to use this strip?

• Long building facades and perimeters
• Guidance lighting for parking lots, ramps, and driveways
• Large-scale covered outdoor lighting
• Industrial sites, warehouses, and technical areas