Parfait,juste un peu jaune
Product description
Dimmable outdoor solar LED floodlight IP65 9W – 1250 lm – Motion and light sensor
The Silumen XG-TYNLD10 outdoor solar LED floodlight is a self-contained, powerful and smart lighting solution designed to effectively secure and illuminate outdoor spaces without an electrical connection. Powered by solar energy, with a combined motion and light sensor and automatic dimming modes, it is suitable for both residential use and professional projects.
High-performance, energy-efficient solar lighting
With a power output of 9W and a luminous flux of 1250 lumens, this floodlight delivers excellent energy performance with a luminous efficacy of 139 lm/W. Its 120° beam angle provides wide, even light distribution, ideal for facades, entrances, courtyards, parking lots or walkways.
The adjustable color temperature from 2700K to 6500K lets you choose between warm, neutral or cooler light, depending on the desired ambiance or level of security.
Smart sensor with 3 automatic modes
The floodlight features a dual motion and light sensor, ensuring it operates only at night and automatically controls the lighting. Three modes are available:
- Detection only: turns on at 100% when motion is detected, then switches off completely after 25 seconds
- Standby mode: continuous lighting at 10% of the light output for 12 hours after nightfall
- Detection + standby: turns on at 100%, dims to 5% after 20 seconds, then switches off completely
These modes provide an excellent balance between safety, autonomy and energy savings.
Solar autonomy and replaceable components
The floodlight is equipped with a 2W – 5V solar panel paired with a built-in 3.7V 2000 mAh lithium battery.
- Charging time: approximately 8 hours
- Battery life: up to 12 to 18 hours, depending on the operating mode
The light source and battery are replaceable, which extends the product's lifespan and reduces long-term maintenance costs.
Solar panel charging and operating conditions
For optimal charging, the solar panel should be installed in a well-exposed location, ideally facing south or southwest, with a tilt angle between 30° and 35°. This angle can be adjusted according to the season to optimize solar energy capture.
Make sure no obstacles block the panel (foliage, walls, permanent shade). We also recommend avoiding areas that are already lit at night, to prevent interference with the light sensor.
Important: during extended periods of low sunlight, especially in winter, cold weather or heavily overcast conditions, the battery may not fully recharge. Under these conditions, runtime and lighting output may be reduced. This is normal operation for a solar-powered product.
Solar operation and charging limitations
This floodlight runs exclusively on solar energy. Lighting performance and runtime depend directly on the panel's ability to properly recharge the battery during the day.
For optimal operation, the solar panel must be installed in an area with good sun exposure, free from shade (trees, walls, roofs, foliage). Any obstruction or insufficient exposure will reduce battery charging.
Please note: during winter, in cold or very overcast weather, or when days are short, sunlight may be insufficient to fully recharge the battery. Under these conditions, the floodlight may operate at reduced capacity (shorter runtime, less frequent lighting or lower brightness).
This behavior is normal for a solar-powered product and does not indicate a defect. For the best performance, we recommend using the automatic dimming modes and ensuring maximum sun exposure.
Rugged outdoor design
Designed for long-lasting outdoor use, this floodlight has an IP65 protection rating, making it resistant to rain and dust. It operates across a wide temperature range, from -20°C to +80°C, even in demanding environments.
- Service life: up to 100,000 hours (L90B50)
- Failure rate: less than 8.23% at 100,000 hours
- Warranty: 5 years
Recommended uses and compliance
This solar LED floodlight is ideal for:
- building façades and entrances
- courtyards, patios and gardens
- walkways, parking lots, outdoor access areas
- energy renovation projects eligible for CEE RES-EC-104
The Silumen XG-TYNLD10 solar LED floodlight offers a reliable, high-performance, self-sufficient outdoor lighting solution, combining safety, durability and energy savings.
Technical specifications
Light source
| Power | 9W |
| Colour temperature | Blanc Froid (6000K - 8000K) |
| LED type | SMD |
| IRC | Ra 70 |
| Incandescent equiv. | 72W |
| Beam angle | 120° |
Electrical
| Electrical Insulation Class | I |
Dimensions
| Cable length | 170 cm |
Installation
| Ingress protection | IP65 |
| Sensor type | Mouvement et Crépusculaire |
Product
| Colour | Noir |
| Certifications | CE & RoHs |
| Warranty | 5 ans |
| Lifespan | ~100 000h |
| Operating temp. | -20 °C~+80 °C |
Connectivity & power
| Solar | Oui |
| Battery life | 12-18h |
| Li-ion battery | 3,7V 2000mAh |
| Charging time | 8 heures |
Downloads
Find all the technical documentation and the declaration of conformity for this product.
Technical documentation (3)
Compliance (1)
Complete your order
Accessories and products compatible with this item.
Similar products
Our customers also liked these products.
Range SOLAR · SUNIX
Complete your installation with products from the same range




Explore related categories11
Browse the ranges this product belongs to.
Questions & answers8
Our technical team answers our customers' questions.
Thank you, your question has been sent.
Our technical team will reply by email.
What operating modes does the solar floodlight with PIR motion sensor have?
The floodlight has 3 modes selectable by pressing the rear button in succession. Full details of each mode are available on the product datasheet, allowing you to choose the mode suited to your needs without having to press the button each time.
Answer from the Silumen technical team · 09/11/2026
What colour temperatures are available on the XG-TYNLD10 product?
This product offers three colour temperatures: 3000K (warm white), 4200K (neutral white) and 6400K (cool white).
Answer from the Silumen technical team · 27/10/2026
Does the 9W IP65 LED solar floodlight have a motion sensor, or only a dusk-to-dawn sensor?
This floodlight features a motion sensor combined with a standby lighting function: the light operates continuously at 10% intensity and switches to 100% when motion is detected.
Answer from the Silumen technical team · 27/10/2026
What is the length of the cable supplied between the panel and the light, please?
The length of the cable supplied between the solar panel and the light is 1.70 m.
Answer from the Silumen technical team · 12/11/2026
Regarding the 3-CCT product, how is the mode selected? The user guide on the website is very brief. Can the solar panel and the floodlight be adjusted without tools?
The lighting mode is selected directly using a button on the floodlight.
Regarding installation, both the solar panel and the floodlight can be adjusted manually, with no tools required.
Answer from the Silumen technical team
What are the dimensions of the floodlight, please?
The dimensions are 20 × 5 × 5 cm.
Answer from the Silumen technical team
Is it warm white or cool white?
This is a CCT light, so you can choose between warm white, neutral white and cool white.
Answer from the Silumen technical team
Does it come with a remote control?
No, no remote control is supplied with the product.
Answer from the Silumen technical team
No question matches your search.
Verified reviews
100% certified by Société des Avis Garantistres bon produit, je le conseille vivement
No reviews match these criteria.
Recently viewed
Products you viewed recently.














