12W LED Ceiling Light with Built-in Detection for Corridors and Technical Rooms

In common areas and operational rooms, permanent lighting accounts for a significant portion of avoidable consumption. This round ceiling light features microwave detection combined with a twilight threshold: the light only activates when presence is detected and natural lighting is insufficient, then automatically turns off after a delay. No control device is needed in the panel, simplifying electrical wiring and reducing installation time on site. Detection settings are fixed at the factory, preventing misadjustments during use.

Technical Details

• 12W for 1080 lm, luminous efficacy of 90 lm/W
• Fixed color temperature 4000K, neutral white
• Microwave detection with integrated light sensor
• Detection range of 3 m, from frontal or lateral approach
• 3-minute delay after the last movement
• IP44 and IK03, class II insulation (double insulation, no earth connection)
• Ra 80, beam angle 120°, power factor 0.5
• Polycarbonate and aluminum body, Ø 24 x 6.3 cm, energy class F

Features

• Automatic management without remote detector or panel timer
• Twilight threshold prevents activation during daytime in naturally lit rooms
• Approximate lifespan of 50,000 hours, suitable for low-frequency maintenance plans
• Class II suitable for older networks without protective conductor
• IK03 rating for areas with frequent passage

Installation

Surface mounting on ceiling or plate: base fixed with screws, phase/neutral connection to 220-240V network, then clip on the diffuser. No downstream switch is necessary, as detection controls switching on and off. Work is carried out with power off, in accordance with NF C 15-100 installation standards.

Where to Use This Detector Ceiling Light?

• Corridors, lobbies, and stairwells in condominiums
• Technical rooms, boiler rooms, and waste rooms
• Covered parking, cellars, and communal storage rooms
• Stock rooms, back shops, and storage areas
• Restrooms and maintenance rooms in commercial buildings