Motion Detector with DIP Switch IP20
Hide the intelligence of your automatic lighting behind a suspended ceiling or inside a luminaire with this mini 5.8 GHz microwave detector. Its 56 x 40 x 25 mm size makes it perfect for OEM integration or renovation without a visible detector.
Technical Details
Power supply 230V AC 50 Hz, consumption 0.9W. Control 1200W for traditional loads, 300W for LED. Microwave frequency 5.8 GHz. Front and side range 8 m. Floor coverage diameter 4, 10, or 16 m depending on DIP switch setting. Optimal height 1.5 to 3.5 m. Temperature range -20°C / +50°C. IP20 rating.
Features
5.8 GHz microwaves: the signal passes through plastics, drywall, and non-metallic glass, allowing concealed detection. The 4 DIP switches on the front configure sensitivity, light threshold (5 / 30 / 150 / 2000 lux), and delay time (5 seconds to 10 minutes) without tools or software programming. Detection angle 360° / 180° horizontal. Quick self-clamping connectors.
Installation
Integrate the detector into the ceiling, false ceiling, or luminaire (minimum distance of 10 cm from metal elements to avoid parasitic reflections). Connect phase, neutral, and load output via push-in connectors. Set the DIP switches as needed, then test after power is restored.
Where to Use This Motion Detector?
Ideal solution for manufacturers of smart luminaires, false ceiling installations, corridors, halls, dressing rooms, or technical rooms where the detector must remain invisible. Manufacturer’s warranty 5 years.
