Motion sensor with dimmer and DIP switch, IP20
Add a new level of comfort to automatic detection with this micro-sensor combining a 5.8 GHz microwave sensor and a built-in dimmer. L's light switches on gradually for more pleasant lighting in living or transitional spaces.
Technical details
Power supply: 230V AC 50 Hz, power consumption: 0.9W. Controls up to 600W of LED lighting via the built-in dimmer function. Frequency: 5.8 GHz, detection speed: 0.6 to 1.5 m/s. Front detection range: 1 to 8 m, optimal installation height: 2 to 8 m. Polycarbonate housing, 78 x 45 x 25 mm. Operating range: -20°C / +50°C. IP20 for dry indoor use.
Features
The built-in dimmer gradually adjusts the output power according to the DIP settings, from ambient lighting at 30% to full brightness. 4 DIP switches let you configure sensitivity, the light threshold (2 / 10 / 50 / 2000 lux), and the timer (5 s to 30 min). 360° / 180° angle, push-in connectors for quick wiring. Compatible with dimmable LEDs.
Installation
Install the sensor behind a lightweight partition, inside a light fixture, or above a non-metallic false ceiling. Connect the live, neutral, and dimmed output (note: compatible with dimmable LEDs only; check the LED specifications). Set the DIP switches, close the unit, and test.
Where can I use this dimmer sensor?
Living rooms, bedrooms, residential stairways, and nighttime/daytime transition areas where gradually increasing the light improves comfort. Suitable for dimmable LED ambient lighting only. 3-year manufacturer's warranty.
