Single-Phase LED Track Kit + 4 Black GU10 Spotlights - 200 cm
Matte black finish for dark ceilings and exposed technical structures: the two-meter track blends into its mounting surface instead of drawing attention to it. Four adjustable heads and four GU10 lamps complete the set, all under a single item code.
What's included
- 1 black 2 m single-phase track
- 4 black adjustable spot holders
- 4 GU10 9.5 W LED lamps (880 lm), supplied in the ordered color temperature
- Screws, ceiling fixings and track end caps included
Each track section comes with its power connector and end caps: no additional accessories are needed to power the track.
Technical details
- Total power: 38 W (4 x 9.5 W)
- Total luminous flux: 3520 lm (4 x 880 lm)
- Luminous efficacy: 93 lm/W
- Incandescent equivalent: 266W
- Power supply: 220 - 240V, 50-60Hz, alternating current
- Beam angle: 80°
- Color rendering: Ra 80
- Protection rating: IP20 (dry indoor areas)
- Total track length: 200 cm
- Lamp lifespan: ~25000h
- Lamp energy class: F
- Class I — CE & RoHS certification — 2-year warranty
Features
The single-phase track groups all the fixtures on one circuit: the entire line switches on and off from a single control point. This is the quickest setup to connect when the electrical panel has only one lighting circuit.
The 4 holders are adjustable: each head swivels and tilts to direct the beam toward a facade, display stand, or work surface. They slide freely along the entire length of the track, allowing them to be repositioned without tools when merchandising changes.
The supplied GU10 lamps can be replaced like standard lamps: the installation’s color temperature or power level can be changed without replacing the holders or track. Replacing individual lamps limits the stock of spare parts that needs to be kept on site.
Please note: the supplied lamps are not dimmable. To adjust the light intensity, replace them with dimmable GU10 lamps paired with a compatible dimmer - the track and holders stay in place.
Installation
The track is surface-mounted on the ceiling or wall using the supplied screws. The sections connect using the included connectors, then the line is connected to the 220 - 240V mains using the power connector supplied with the track.
L’installation must be carried out by a qualified electrician and comply with NF C 15-100. Switch off the power at the circuit breaker before making any connections and check earth continuity: the assembly is Class I.
Where should you use this track lighting kit?
Bars, restaurants, tasting rooms, and event spaces: the black profile disappears against a dark-painted ceiling, drawing the eye to the illuminated areas. Two meters are enough to light a counter or display wall.
