Waterproof LED batten with motion and light sensor IP65 36W 110lm/w
In a parking area, storage aisle, or basement corridor, the lighting often stays on continuously for lack of suitable controls. This 120 cm batten offers three solutions to this problem: an integrated microwave sensor, an automatic shut-off timer, and interconnection that lets you connect up to 8 units to a single power supply.
Technical details
Power supply: 220 - 240V, 50-60Hz. Power consumption: 36W for a luminous flux of 3960 lumens, equivalent to a luminous efficacy of 110 lm/W. Neutral white, 4000K, color rendering index Ra 80, 120° beam angle. Dimensions: 120 x 5,8 x 6,4 cm. IP65 rating: dustproof and protected against water jets, meeting the usual requirements for technical rooms and covered parking facilities. IK08 mechanical resistance. Power factor greater than 0.9, limiting apparent power draw and ensuring flicker-free operation, an important consideration under the NF EN 12464-1 standard for workplaces. Class II insulation, no protective conductor.
Features
The microwave sensor detects movement through plastic covers up to 3 meters away, with a dusk threshold of 13 to 18 lux. Lights switch off 3 minutes after the last detection. Link-up is via the supplied watertight quick connector, for up to 8 lights in series. Declared lifespan: 50,000 hours according to the L70B10 protocol. Package includes: 1 light, 2 mounting brackets, 1 watertight quick connector, 2 expansion plugs, 2 screws. 2-year warranty.
Installation
Isolate the installation. Mark and drill two anchor points, keeping the spacing between them shorter than the luminaire, insert the wall plugs, then secure the brackets. Unscrew the watertight connector, feed the power cable through the cable gland, connect the live (L) and neutral (N) wires, then retighten the cap: tightening this connector is essential to maintaining the IP65 rating. Clip the batten onto its brackets, adjust its position sideways, then restore power. Installation must be carried out by a qualified professional in accordance with NF C 15-100.
Where can you use this LED batten?
Covered parking garages, basements, cellars, workshops, warehouses, storage aisles, utility rooms, boiler rooms, industrial laundries, agricultural buildings, and traffic areas in dusty or humid environments. Linkability makes it an economical solution for equipping long runs from a single power supply, and the integrated detection meets the requirements for automatic lighting control in areas with intermittent occupancy.
