2 m Aluminum Profile for White Ceiling Cove with White Cover
Designed for ceiling coves, this 2 m aluminum profile with a white body and white cover houses the LED strip in the cove and provides continuous indirect lighting along the entire length of the room. The light source remains invisible from the floor: only the line of light appears on the underside or wall. See our full range of aluminum profiles.
Technical details
- Bar length: 200 cm
- Cross-section: 150 x 27.2 mm
- Aluminum body, white finish
- White cover
- LED strip and power supply sold separately
- CE & RoHs compliant
- 2-year warranty
Features
- Cove installation for indirect lighting without direct glare
- Aluminum body dissipates heat from the LED strip’s circuit board and helps maintain light output over time
- White cover conceals the light source and creates a uniform appearance along the line
- White finish suited to ceilings and light-colored wall linings
- Can be cut on site to match the actual length of the installation
Installation
Work with the power off and the LED strip circuit isolated. Measure the length to be fitted and plan the layout of the 2 m bars; cut them with a hacksaw, then deburr each end. Secure the body to its support using suitable screws (plasterboard, concrete, or wood). Attach the LED strip to the bottom of the profile, route the cable out through the end, and connect the power supply, taking voltage drop (the loss of voltage along the strip) into account for longer runs. Fit the white cover, then test the lighting run after restoring power.
Where can this cove profile be installed?
Reception areas, office corridors, meeting rooms, hotel bedrooms, restaurants, and boutiques: anywhere a perimeter ceiling cove defines the space and complements the main lighting. The bars can be aligned end to end to cover the entire perimeter of a room.
