IP44 15W 90lm/w Wall-Mounted Bulkhead Light with Motion Sensor and Light
In apartment building corridors, shared areas and service rooms, manual switching is the main source of wasted energy: lights are left on because there is no timed switch. This 15W bulkhead light has a built-in motion sensor and dusk sensor, allowing you to automate a light point without adding a remote sensor or modifying the existing circuit.
Technical details
Direct connection to a 220 - 240V, 50-60Hz circuit. Power consumption: 15W for a luminous flux of 1350 lumens, giving a luminous efficacy of 90 lm/W. Colour temperature: 4000K, colour rendering index: Ra 80, beam angle: 120°. Diameter: 19 cm, thickness: 4,8 cm. IP44 protection rating (protection against water splashes) and IK03 mechanical resistance. Class II fixture (double insulation), so it connects to two conductors without a protective earth conductor, in accordance with NF C 15-100. Power factor: 0.5. When installing multiple units on the same circuit, account for the apparent power when sizing the circuit.
Features
Detection is provided by a PIR (passive infrared) sensor with a range of 3 metres, combined with a dusk threshold set between 13 and 18 lux, which prevents the light from turning on while natural light is sufficient. The light switches off 3 minutes after the last detection. Rated lifespan: 50000 hours according to the L70B10 protocol (luminous flux reduction of no more than 30% by the end of this period). 2-year warranty, CE & RoHs compliance.
Installation
Isolate the circuit and check that there is no voltage. Drill holes according to the supplied mounting plate, insert wall plugs, then screw the plate to the mounting surface. Open the junction box cover and connect the live wire (L) and neutral wire (N) to the corresponding terminals, using a cable with a cross-section of 2 x 0.5 to 2 mm². Lock the fixture onto its mounting plate, then restore power. Keep the lens clear of any obstructions and do not point it toward a heat source or an area with constant foot traffic, as this may cause false triggers. Installation must be carried out by a qualified professional.
Where should you use this bulkhead light?
Shared condominium areas, landings, stairwells, walkways, utility rooms, storage rooms, laundry rooms, and restrooms. LIts IP44 rating makes it suitable for damp areas and zones 2 and 3 of bathrooms, as well as sheltered outdoor areas. In commercial settings, it offers a simple solution for automatically managing lighting in intermittently occupied areas.
