10m COB LED Strip 24V IP20 504LED/m 5.8W/M CRI90
A continuous line of light, with no hotspots or dotted effect: that's what COB technology delivers, with the chips embedded in a uniform phosphor coating along the entire length. This 10-meter, 24V strip delivers 510 lumens per meter at 5.8 W/m, with Ra 90 color rendering that faithfully reproduces materials and shades. Its constant-current chips (IC) ensure consistent brightness across the entire roll when powered from one end.
Technical details
- Total power: 58W, or 5.8 W/m
- Luminous flux: 5100 lumens, or 510 lm/m
- Efficiency: 88 lm/W
- Density: 504 LED/m, COB technology
- Constant-current chips (IC): 10 m powered from one end with no loss of brightness
- Voltage: 24V DC, powered by a transformer
- Color rendering: Ra 90
- Beam angle: 140°
- Ingress protection rating: IP20 (indoor use)
- Dimensions: 1000 x 1 x 0.2 cm
- Insulation class: Class III (safety extra-low voltage)
- F energy rating, approximately 30,000-hour lifespan
- CE & RoHs certified, 3-year warranty
Features
- Continuous linear lighting, without the visible dots of conventional SMD strips
- Constant current: consistent brightness from start to end of the roll, with no voltage drop
- Ra 90 for applications where color matters: interior design, retail, workshop, countertop
- Dimmable using a dimmer compatible with 24V DC, PWM or 0-10V, depending on the driver
- Flexible 10 mm printed circuit board, to be installed in an aluminum profile or on a flat surface
- Can be cut every few centimeters at the marked points on the circuit
Installation
First, size the power supply: 10 meters at 5.8 W/m draws 58W, so you need a 24V transformer rated for at least 70W to allow a 20 percent margin, meaning a 75W power supply. Thanks to the constant-current chips, all 10 meters can be powered from one end without any loss of brightness at the far end. Stick the strip to a clean, degreased surface, preferably inside an aluminum profile that acts as a heat sink and extends its lifespan. Cut only at the marked points, and observe polarity when connecting. L'installation should be carried out by a qualified electrician.
Where to use this LED strip?
In a cove, in a bright alcove, under a wall cabinet, along a stairway, in a shop window display or as countertop lighting. L'IP20 limits it to dry areas indoors.
