Product description
50M 220V COB LED Strip, Cuttable Every 50cm, IP65, 288LED/m
Fifty meters powered from a single outlet, with no power supply unit to install and no low voltage to distribute: for long runs, direct 220V power eliminates the constraint that typically affects 12 and 24V strips: voltage drop. COB technology also provides a continuous line, a common requirement in interior design and hospitality.
Technical details
- 220 - 240V power supply, alternating current - direct connection to an outlet
- Power: 10 W per meter, or 500 W for the 50 m roll
- Current: 2.2 A (at 230 V)
- COB technology - 288 LED chips per meter
- Color rendering index CRI Ra 80
- Lighting angle: 180°
- IP65 protection rating (protected against dust and water jets)
- Cuttable every 50 cm at marked points
- Strip dimensions: 5000 cm long, 0.9 cm wide, 0.4 cm thick
- Operating temperature: -25°C to +45°C
- Minimum bending radius: 2 cm
- 3M adhesive backing, mounting clips and screws included
- 220V power cable with plug included
- CE & RoHs certification
- 2-year warranty
Features
- Direct mains power: no transformer or voltage drop calculations required
- Usable 50 m length from a single connection point
- Continuous line with no visible breaks, including in indirect lighting
- Cuttable sections every 50 cm, with a 50 cm minimum length
- IP65 rating: damp rooms, outdoor areas, commercial kitchens
- Power cable, clips, and screws included with the roll
Installation
Fully unroll the strip before powering it on: testing a strip while it is still coiled causes immediate overheating. Check that the power circuit is not overloaded and has suitable protection. Secure the strip using the adhesive backing and screw-in clips, spaced every 50 centimeters. Cut only at the designated solder points, never at intervals shorter than the 50 cm unit, and seal the end before use. Ensure the mounting surface has adequate ventilation.
Where to use this LED strip?
Hotel coves, dropped ceiling edges, retail shelving, counter undersides, walkways, covered terraces, and illuminated signs. The 50 m length covers an entire floor or the perimeter of a room without an intermediate connection point. L'IP65 rating withstands splashes and washing, but not immersion or use in pools.
Technical specifications
Light source
| Power | 500W |
| Luminous efficacy | 100 lm/W |
| Luminous flux | 50000 lm |
| Colour temperature | Blanc Chaud (2300K - 3500K) |
| LED type | COB |
| LEDs per metre | 288 LED/m |
| IRC | Ra 80 |
| Incandescent equiv. | 10 W/m |
| Beam angle | 180° |
| Dimmable | Oui |
Electrical
| Voltage | 220 - 240V |
| Current type | AC |
| Power supply | Secteur |
| Frequency | 50-60Hz |
| Current | 2,2 A |
| Energy class | F |
Dimensions
| Dimensions | 5000 x 0,92 x 0,42 cm |
| Length | 5000 cm |
| Width | 0,92 cm |
| Thickness | 0,42 cm |
| Cuttable | 50 cm |
Installation
| Ingress protection | IP65 |
| Dimmer | Oui |
Product
| Certifications | CE & RoHs |
| Warranty | 2 ans |
| Lifespan | ~50000h |
| Operating temp. | -25°C à +45°C |
Downloads
Find all the technical documentation and the declaration of conformity for this product.
Technical documentation (3)
Compliance (1)
Complete your order
Accessories and products compatible with this item.
Similar products
Our customers also liked these products.
Discover the alternative
Our LED strips for professionals: superior performance, guaranteed reliability





Explore related categories9
Browse the ranges this product belongs to.
Questions & answers
Our technical team answers our customers' questions.
Thank you, your question has been sent.
Our technical team will reply by email.
No questions yet.
Need a technical detail before ordering? Our technical team will reply by email.
Recently viewed
Products you viewed recently.











