COB LED Strip 50M AC 296 LED/m 220V 10W/m IP65

220V COB LED strip in a 50 m reel for extended runs

This long reel reaches the product's maximum series length: a single 50 m reel covers an entire run with no intermediate joints, eliminating connection points that are most vulnerable to sealing failures and maintenance work. The 296 LEDs per meter using COB (Chip On Board) technology produce a perfectly continuous line, with no visible dotted effect under a diffuser. LDirect 220V power eliminates the need for a driver and associated technical space. Cut at the marked points; the IP65 rating makes it suitable for damp environments and sheltered outdoor areas.

Technical details

• 10W per meter, or 500W for the 50 m reel
• 296 LEDs per meter using COB technology
• Luminous flux of approximately 800 lm per meter, efficacy of 80 lm/W
• Direct 220-240V power supply, no driver required
• Maximum series length of 50 m, achieved with a single reel
• IP65 rating, cut at the marked points
• Operating range from -20°C to +40°C

Features

• A 50 m run with no intermediate joints or connection points
• Continuous light line with no visible dots along its entire length
• No driver to size or fit inside the structure
• Flexible enough to follow coving, returns and curves
• Cut at the marked points to adjust the layout

Installation

Gradually unroll the reel along the surface, secure the strip with clips or in an aluminum profile, then connect the end cap to 220-240V. As the reel reaches the maximum series length, no additional strips can be connected in series. Cut only at the marked points, and seal the free end with an end cap. Disconnect the power before carrying out any work.

Where can you use this COB LED strip?

• Large retail spaces and extended sales aisles
• Coving and ceiling drops in commercial spaces
• Long lobbies, walkways and reception areas
• Aisle and loading dock marking
• Commercial kitchens and damp utility rooms