COB LED Strip 5m Cut Anywhere 24V 10W/m IP20 8mm 570lm/m

5m COB LED Strip, Cut to Length, 24V, 10W/m, IP20, 8mm, 570lm/m

In store fittings, the most common complaint about linear lighting is the visible dotted effect behind a diffuser. COB technology (Chip On Board, LED chips embedded beneath a continuous layer of phosphor) eliminates it: the light is uniform along the entire length, even when viewed directly.

Technical details

• Power: 10 W per meter, or 50 W for the 5 m roll
• Luminous flux: 570 lumens per meter, or 2850 lumens in total
• Luminous efficacy: 57 lumens per watt
• 24V DC power supply
• COB technology - 400 LED chips per meter
• Color rendering index CRI Ra 90
• PCB width: 8 mm
• Length: 500 cm
• IP20 protection rating (indoor use, no protection against water)
• CE & RoHs certification
• 2-year warranty

Features

• Continuous line with no visible dots, even without a diffuser
• Can be cut every centimeter between two solder pads
• CRI Ra 90, faithfully renders materials and textiles
• 24V low voltage: limited voltage drop over long runs
• Powered by a 220V - 24V transformer, not included

Installation

Cut the strip to the required length between two solder pads, degrease the surface, and press it down along its entire length. Connect it to the 220V - 24V transformer, observing the marked polarity. For long runs, power it from both ends to maintain uniform brightness at the far end. Mounting it in an aluminum profile improves heat dissipation and extends its lifespan.

Where to use this LED strip?

Store fittings, hotel cornices, counter undersides, display cases, gondola shelving, bedroom headboards. IP20 rating: for dry locations only, away from wash areas and outdoors.