COB LED Strip AC 296 LED/m 220V 10W/m IP65 (cut to length, sold by the metre)

220V COB LED strip sold by the meter, length matched to the measured amount

Cut-to-length sales mean you don't have to tie up a whole reel for a run of just a few meters: order the measured length from the plan, with no offcuts to pay for or leftover stock to manage. The strip retains the range's specifications — 296 LEDs per meter using COB (Chip On Board) technology for a continuous, dot-free line, direct 220V power without a driver, and an IP65 rating. It can still be cut at the marked points on the installation, for last-minute adjustments during fitting.

Technical details

• 10W per linear meter
• 296 LEDs per meter using COB technology
• Luminous flux of approximately 800 lm per meter, efficacy of 80 lm/W
• Direct 220-240V power supply, no driver required
• Maximum length of 50 m in series
• IP65 protection rating, cut at the marked points
• Operating range from -20°C to +40°C

Features

• Length ordered to the exact measured amount: no offcuts or leftover material
• Continuous line of light, with no visible dots under the diffuser
• No driver to size or house within the structure
• Additional adjustments can be made at the marked cutting points during installation
• Flexibility suited to cornices, returns and curves

Installation

Unroll the supplied length along the surface, secure the strip with clips or in an aluminum profile, then connect the end cap to 220-240V. Additional cuts must be made only at the marked points; seal the free end with an end cap to maintain IP65 protection. Do not exceed 50 m in series. Work with the power off.

Where can you use this COB LED strip?

• Adjustments and additions to existing fittings
• Cornices, niches and drops with unusual lengths
• Shop windows, display units and custom commercial furniture
• Step edges, handrails and localized marking
• Renovations and partial refurbishments in occupied premises