IP44 solar LED projector with detector and panel
Outdoor projector 'motion detector' Solar panel 'IP44
You are looking for an economical lighting solution capable of lighting and securing your exterior '' Siluma has what you need. We advise you to opt for this LED projector of 10W and IP44 certified. It has a solar panel which feeds it, and a movement detector. Order now on Silumen and enjoy all the advantages of Solar projectors with a motion detector.
The characteristics of the solar LED projector with Silumen panel and detector
Light up and secure its outdoor spaces
If you want to install a luminaire in your courtyard, remember to opt for a versatile lighting solution that can also improve the safety of your outdoor spaces. With this in mind, we invite you to buy this Silumi outdoor LED projector with a panel and a detector.
By installing it at a height of 2.5 m on a wall, it offers you a cold white lighting (5000 k) of light intensity of 800 lumens, diffusing according to an angle of 90 °.
A projector that works with solar energy
This projector is ideal for shedding light on the areas in which the supply in the mains is difficult to access. It has an integrated rechargeable battery which recharges thanks to thesolar energy.
A photovoltaic panel is provided With this solar outdoor projector. Thanks to its type of power supply, you can enjoy quality external lighting without climbing your electricity bill.
Provided with a motion detector
In order to secure your courtyard, a motion detector is located on the battery compartment below the LED projector. Its sweeping angle is 90 ° horizontally, with a range of 6 meters.
By installing this projector, remember to orient the sensor above the average height of an animal in order to avoid the trigger of the light by the latter.
Durable and resistant external lighting
Benefit from Advantages of LED lighting By opting for this outdoor projector. Thanks to its duration reaching 20,000 hours of use, enjoy your outdoor lighting for several years.
This projector is IP44 certified, guaranteeing the possibility of installing it outdoors. It is strongly advised to put it in a sheltered location to enjoy its maximum longevity.
Installation of the solar projector with motion detector
- 1 - Choose the location of your projector and mark the position of the screw holes.
- 2 - Pour the screw holes and mount the projector using two screws or bolts.
- 3 - Install the solar panel assembly base using the screws provided.
- 4 - Place the panel in it, adjusting its position so that it receives the most sunlight.
- 5 - Pass the panel cable to the lamp and connect it.
- 6 - Adjust the light sensor direction as a function of the desired detection zone.
- 7 - Light the solar lamp by pressing the ON/OFF button.
Caractéristique | Valeur |
---|---|
Puissance | 10W |
Lumens/W | 80 did not/and |
Dimmable | Non |
Fréquence | 50-60 |
Intensité du courant | 3,13 Ah |
Rendu des couleurs IRC | Ra 80 |
Angle d'éclairage | 90° |
Indice de Protection | IP 44 |
Solaire | Oui |
Autonomie | 1 h |
Classe énergétique | G |
Température de fonctionnement | -20 ° C to +50 ° C |
Temps de charge | 7 to 8 h |
Tension | 3,2 and |
Type de courant | DC |
Type de détecteur | Movement |
Temps de détection | < 200ms |
Couleur | Noir |
Dimensions | 135 x 95 mm |
Largeur | 95 mm |
Longueur | 135 mm |
Forme du luminaire | Rectangle |
Certifications | What & Rohs |
Garantie | 2 ans |
Batterie li-ion | 2000 mAh |
Orientable | Oui |
Luminosité | 800 lm |
Portée totale | 6 m |
Détecteur | Included |
Détecteur de mouvement | Oui |
Durée de vie | ~25 000h |
Fonction | Solar captor |
Vous souhaitez plus d'informations sur le produit ? Contactez notre service client à contact@silumen.com