Single-Circuit L-Shaped LED Track Kit + 5 Black GU10 Spotlights - 300 cm
A 90° black corner return, with five light points spread over three meters: this setup is designed for layouts that follow the shape of the room rather than a regular pattern. The corner connector, end caps and screws are included.
What's included
- 1 black 2 m single-circuit track
- 1 black 1 m single-circuit track
- 1 black single-circuit 90° corner connector
- 5 black adjustable spotlight holders
- 5 GU10 9,5 W LED lamps (880 lm), supplied in the ordered color temperature
- Screws, ceiling mounts and track end caps included
Each track section comes with its power connector and end caps: no additional accessories are needed to power the track.
Technical details
- Total power: 47,5 W (5 x 9,5 W)
- Total luminous flux: 4400 lm (5 x 880 lm)
- Luminous efficacy: 93 lm/W
- Incandescent equivalent: 333W
- Power supply: 220 - 240V, 50-60Hz, alternating current
- Beam angle: 80°
- Color rendering: Ra 80
- Protection rating: IP20 (dry indoor areas)
- Total track length: 300 cm
- Lamp lifespan: ~25000h
- Lamp energy rating: F
- Class I — CE & RoHs certified — 2-year warranty
Features
Single-circuit track brings all the fixtures together on one circuit: the entire track switches on and off from a single control point. This is the quickest setup to connect when the electrical panel has only one lighting circuit.
The 5 holders are adjustable: each head swivels and tilts to direct the beam toward a facade, display stand, or work surface. They slide freely along the entire length of the track, allowing you to rearrange them without tools when changing the merchandising layout.
The supplied GU10 bulbs can be replaced like standard bulbs: the installation’s color temperature or power level can be changed without replacing the holders or track. Replacing individual bulbs reduces the spare-parts stock that needs to be kept on site.
Please note: the supplied bulbs are not dimmable. To adjust the light intensity, replace them with dimmable GU10 bulbs and a compatible dimmer — the track and holders can remain in place.
Installation
The track is surface-mounted on the ceiling or wall using the supplied screws. The sections are joined using the included connectors, then the line is connected to the 220 - 240V mains using the power connector supplied with the track.
L’installation must be carried out by a qualified electrician in compliance with NF C 15-100. Switch off the power at the panel before making any connections and check the continuity of the ground connection: the unit is Class I.
Where can you use this track lighting kit?
Fashion boutiques, concept stores, galleries: the 90° return follows a wall corner or changing-room area. The single circuit suits spaces where the electrical panel has only one available lighting circuit.
