White Single-Circuit LED Track Kit in L + 5 GU10 Spotlights - 300 cm
Supplied with its corner connector, this L-shaped configuration handles a wall return or display window corner without requiring additional planning. Three meters of track, five light points and installation hardware are combined under a single reference, simplifying both quoting and on-site logistics.
What's included
- 1 white 2 m single-circuit track
- 1 white 1 m single-circuit track
- 1 white single-circuit 90° corner connector
- 5 white adjustable spot holders
- 5 GU10 9.5 W LED lamps (880 lm), supplied in the ordered color temperature
- Screws, ceiling mounts and track end caps included
Each section comes with its power connector and end caps: no additional accessories are needed to power the track.
Technical details
- Total power: 47.5 W (5 x 9.5 W)
- Total luminous flux: 4400 lm (5 x 880 lm)
- Luminous efficacy: 93 lm/W
- Incandescent equivalent: 333W
- Power supply: 220 - 240V, 50-60Hz, alternating current
- Beam angle: 80°
- Color rendering: Ra 80
- Protection rating: IP20 (dry rooms)
- Total track length: 300 cm
- Lamp lifespan: ~25000h
- Lamp energy rating: F
- Class I — CE & RoHs certified — 2-year warranty
Features
The single-circuit track groups all the fixtures on one circuit: the entire line switches on and off from a single control point. This is the quickest setup to connect when the electrical panel has only one lighting circuit.
The 5 holders are adjustable: each head swivels and tilts to direct the beam toward a façade, display stand, or work surface. They slide freely along the entire track, allowing you to rearrange them without tools when updating the display.
The supplied GU10 lamps can be replaced like standard bulbs: the installation's color temperature or power level can be changed without replacing the holders or track. Replacing individual lamps limits the spare parts that need to be kept on site.
Please note: the supplied lamps are not dimmable. To adjust the brightness, replace them with dimmable GU10 lamps paired with a compatible dimmer—the track and holders stay in place.
Installation
The track is surface-mounted on the ceiling or wall-mounted using the supplied screws. The sections are joined with the included connectors, then the track is connected to the 220 - 240V mains using the power connector supplied with the track.
L installation must be carried out by a qualified electrician and comply with NF C 15-100. Switch off the power at the panel before making any connections and check the continuity of the earth connection: the assembly is Class I.
Where can you use this track lighting kit?
Corner display cases, return reception desks, exhibition spaces: the L shape follows the layout of the premises without requiring any rewiring. This format is suitable for retail spaces of 20 to 40 m² and reception areas in public-access buildings.
