L-Shaped Three-Phase LED Track Kit + 5 White GU10 Spotlights - 300 cm
Three circuits, five spotlights and a 90° return: this L-shaped configuration is suited to retail layouts where general lighting and accent lighting need to be controlled separately. The three-phase corner connector is included.
What's included
- 1 white 2 m three-phase track
- 1 white 1 m three-phase track
- 1 white three-phase 90° corner connector
- 5 white adjustable spotlight holders
- 5 GU10 9,5 W LED lamps (880 lm), supplied in the ordered color temperature
- Screws, ceiling fixings and track end caps included
Each track section comes with its power connector and end caps: no additional accessories are required to power the track.
Technical details
- Total power: 47,5 W (5 x 9,5 W)
- Total luminous flux: 4400 lm (5 x 880 lm)
- Luminous efficacy: 93 lm/W
- Incandescent equivalent: 333W
- Power supply: 220 - 240V, 50-60Hz, alternating current
- Beam angle: 36°
- Color rendering: Ra 80
- Protection rating: IP20 (dry areas)
- Total track length: 300 cm
- Lamp lifespan: ~25000h
- Lamp energy class: F
- Class I — CE & RoHs certified — 2-year warranty
Features
The three-phase track provides three independent circuits on a single profile. Each spotlight is positioned on the desired circuit when clipped into place, allowing general lighting and accent lighting to be separated without running an additional line.
The 5 holders are adjustable: each head swivels and tilts to direct the beam toward a facade, display stand, or work surface. They slide freely along the entire length of the track, allowing repositioning without tools when the merchandising layout changes.
The supplied GU10 lamps can be replaced like standard bulbs: the color temperature or power level of the installation can be changed without replacing the holders or track. Replacing individual lamps limits the spare parts that need to be kept on site.
Please note: the supplied lamps are not dimmable. To adjust the light intensity, replace them with dimmable GU10 lamps and a compatible dimmer—the track and holders can remain in place.
Installation
The track is surface-mounted on the ceiling or wall-mounted using the supplied screws. The sections connect with the included connectors, then the track is connected to the 220 - 240V mains using the power connector supplied with the track.
L’installation must be carried out by a qualified electrician in compliance with NF C 15-100. Switch off the power at the panel before making any connections and check earth continuity: the system is Class I.
Where can you use this track lighting kit?
Retail stores, offices, reception areas: the L-shaped configuration covers a wall and its return, with the option to zone the space between the storefront and sales floor. It connects to an existing subpanel, with no need to modify the main line.
