220V 360W TRIAC LED Dimmer Kit + Push Dim with Remote Control - Black
Adjust the brightness of your dimmable LED bulbs, TRIAC drivers and halogen bulbs directly on the 220V mains with this recessed TRIAC dimmer kit + RF remote control. It supports loads up to 360W and fits in a standard 86 mm wall box. The DIP switch lets you choose between leading edge (TRIAC — the lamp receives the current gradually) and trailing edge (ELV — cut-off at the end of the cycle, better suited to LEDs). LPush-Dim input enables control with a push-button switch in addition to the remote control. Certified CE EMC LVD RED, with a 5-year warranty.
Technical details
-
Type: AC TRIAC dimmer kit + RF remote control for 220V dimmable LEDs
-
Input voltage: AC 100-240V
-
Output voltage: AC 100-240V
-
Output current: Max 1.5A
-
Power: 150-360W
-
Output type: AC TRIAC (dimming by AC phase cutting)
-
Compatible lighting type: Single-color 220V
-
Dimming levels: 256 levels
-
Dimming range: 0-100%
-
Communication: 2.4GHz RF + Push-Dim, range 30m
-
Push-Dim input: Yes (AC Push-Dim input)
-
DIP switch: Leading edge (TRIAC) or trailing edge (ELV), depending on the load type
-
Minimum brightness: Adjustable 5%/10%/15%/20%/25%/30%
-
Compatible loads: Dimmable LEDs 200W max, TRIAC drivers 200W max, incandescent/halogen 360W max
-
Protection rating: IP20 (indoor)
-
Operating temperature: -20°C to +55°C
-
Dimensions: 52 x 52 x 26 mm (fits in an 86 mm box)
-
Certification: CE EMC LVD RED
-
Warranty: 5 years
Features
- Flush-mounted AC TRIAC dimmer in the standard 86x86 mm format—fits any European wall box
- The DIP switch lets you toggle between leading-edge and trailing-edge modes according to your load type, for optimal, flicker-free dimming
- Minimum brightness adjustable in 6 steps (from 5% to 30%) using the Min Set button—prevents LED bulbs from switching off prematurely at low brightness
- The RF remote offers 4 quick brightness levels (25/50/75/100%), a nightlight mode, 2 scene memories, and +/- brightness adjustment
- The L Push-Dim input accepts a standard push-button switch to turn on, turn off, and dim without the remote control
- Automatic signal transmission and synchronization between multiple dimmers within a 30 m range
220V installation & wiring
This dimmer fits a standard 86x86 mm wall box. It is wired in series between the mains live/neutral and the load (dimmable LED bulbs, recessed spotlights, TRIAC drivers). Before working on it, switch off the power at the circuit breaker. Select the dimming type using the DIP switch, connect L and N on the INPUT side, then connect the OUTPUT side to the load, and adjust the minimum brightness if needed. Have a professional carry out the wiring.
⚠️ Pro safety (AC 220-240V): switch off the power before handling. Confirm the DIP switch setting before turning on the power.
Where to use this TRIAC dimmer?
Compatible with dimmable LED bulbs (200W max), TRIAC LED drivers (200W max), and incandescent/halogen lamps (360W max). Ideal for bedrooms, living rooms, dining rooms, offices, meeting rooms, shops, restaurants, and hotels—anywhere simple, reliable brightness control is needed.
