Motion Detector with DIP Switch IP20
Hide the intelligence behind your automatic lighting above a suspended ceiling or inside a light fixture with this mini 5.8 GHz microwave detector. Measuring 56 x 40 x 25 mm, it's perfect for OEM integration or retrofits where no visible detector is desired.
Technical details
Power supply: 230V AC 50 Hz, power consumption: 0.9W. Switching capacity: 1200W for standard loads, 300W for LED. Microwave frequency: 5.8 GHz. Front and side range: 8 m. Floor coverage diameter: 4, 10 or 16 m, depending on the DIP switch setting. Optimal mounting height: 1.5 to 3.5 m. Temperature range: -20°C / +50°C. IP20 rating.
Features
5.8 GHz microwave: the signal passes through plastics, drywall and non-metallized glass, enabling concealed detection. The 4 DIP switches on the front configure sensitivity, the brightness threshold (5 / 30 / 150 / 2000 lux) and the time delay (5 s to 10 min), with no tools or software programming required. Detection angle: 360° / 180° horizontal. Self-clamping quick connectors.
Installation
Install the detector in the ceiling, suspended ceiling or light fixture (keep at least 10 cm from metal components to avoid unwanted reflections). Connect the live, neutral and load output wires using the push-in connectors. Set the DIP switches as needed, then test after restoring power.
Where can you use this motion detector?
An ideal solution for manufacturers of smart light fixtures, suspended ceiling installations, corridors, halls, walk-in closets or utility rooms where the detector needs to remain invisible. 5-year manufacturer's warranty.
