5W IP67 recessed ground light for pathway lighting
The most compact model in the range meets pathway lighting needs where ground space is limited: 80 mm overall diameter, 74 mm cutout, and 334 lumens with a 30° beam. Its isolated driver and direct 220-240V connection eliminate the need for a remote power supply, simplifying cable runs along a line of multiple lights.
Technical details
- Power consumption 5W, luminous flux 334 lm, efficacy 67 lm/W
- Direct connection 220-240V, 50-60 Hz, integrated isolated driver
- Class I, earth connection required in accordance with NF C 15-100
- IP67 protection rating, permissible ambient temperature from -20 °C to +40 °C
- 30° beam, CRI Ra 80, non-dimmable product
- Overall dimensions ø 8 x 7.4 cm, cutout ø 7.4 cm, 10 cm cable lead
- Stainless steel, aluminum, and PP body, L70B10 service life of approximately 30,000 hours
- CE compliance with directives 2014/35/EU, 2014/30/EU, 2011/65/EU, 2012/19/EU, EU 2019/2020, and EU 2019/2015
Features
The luminaire consists of three parts: the cover, inner body, and recessed housing, which is supplied with the product. This separation allows the housings to be set in place during the structural work, with the light bodies installed only when the construction site is handed over, reducing the risk of breakage and theft. For maintenance, the body can be removed without breaking the seal. As the product is not dimmable, do not install a dimmer or a phase-cut detector on the circuit.
Installation
Isolate the power supply before carrying out any work. Cut a recess to the dimensions of the housing, pass the power cable through it, then secure it with mortar or a suitable fixing material, observing the installation orientation. Provide a drainage bed beneath the housing: IP67 covers temporary immersion, not prolonged standing water. Connect the inner body to the cable, including the earth wire, insert it, reposition the upper part, and check that it is secure before restoring power. Use a watertight connector suitable for outdoor use.
Where should you use this recessed ground light?
Pedestrian paths, condominium walkways, patios, paved areas, outdoor steps, and areas around buildings. For outdoor use only, recessed into the ground, not for permanent immersion or areas where water collects.
