Pack of 10 Outdoor Recessed Ground Spotlight 18W IP67 220V 30° Ø180

10 Ø180 18W in-ground spotlights for architectural lighting

For engineering firms and lighting designers working on façades, heritage sites or large landscape features, this set of ten 18W spotlights delivers the highest luminous flux in the range in a recessed format just 8.9 cm high.

Technical details

1572 lm per 18W spotlight (87 lm/W, equivalent to 135W); 15720 lm and 180W for the set. 30° beam, Ra 80, 220-240V 50-60Hz, IP67, ø 18 x 8.9 cm, 14.8 cm cutout, 20 cm cable, stainless steel, aluminium and PP, Class I, approximately 30000 hours, -20°C to +40°C, energy class F.

Features

The 30° beam covers considerable heights; two or three intersecting points at the base of the same feature create modelling without harsh shadows. Colour temperature should be specified during the design phase according to the materials: warm white for stone and greenery, neutral or cool white for contemporary façades. Non-dimmable luminaire.

Installation

Isolate the circuit, reserve a 14.8 cm opening, seal the supplied housing, connect to 220V with a protective conductor using the 20 cm cable, insert the fixture and tighten the mounting plate. Outdoor circuit protected by a 30 mA residual-current device in accordance with NF C 15-100; drainage is required beneath each housing.

Where to use this pack?

Public and commercial building façades, monuments and heritage sites, public parks and gardens, large properties, hotel estates.