Pro Frame Kit with 8 Hexagons and Frame, 387.5W Hexagonal LED Lighting, 110lm/W
Configuration for a complete work area: a 360 x 240 cm perimeter frame made of 120 cm bars, with an inner grid of 8 hexagons made of 44 cm bars. The two assemblies are wired to separate circuits, for a total of 387.5 W and 42625 lm in cool white. The frame can provide permanent circulation lighting, while the grid provides task lighting controlled separately.
Technical details
- Total power consumption: 387.5 W (frame 160 W + grid 227.5 W)
- Total luminous flux: 42625 lm – 110 lm/W
- Color temperature: cool white 6000K - 8000K
- Power supply: 220 - 240V AC, direct connection
- Dimming: not supported
- Protection rating: IP20
- Ceiling coverage: 360 x 240 cm
- Circuits: 2 feeds (frame / grid)
- Material: polycarbonate
- CE & RoHS marking – 2-year warranty
Kit contents
- 10 120 cm 16W LED bars
- 35 44 cm 6.5W LED bars
- 4 L connectors (90°)
- 6 I-connectors (straight)
- 14 Y-connectors (3 branches at 120°)
- 14 120° angle connectors (2 branches)
- 2 power cables
- 1 disassembly tool for hexagon light bars
Features
The frame consists of 10 bars measuring 120 cm: 3 on each long side, joined by straight connectors, and 2 on each short side, with the corners closed using L connectors. The inner grid uses a honeycomb layout with 8 cells, Y-junctions and 120° contours. Separating the two circuits allows for two operating modes (frame only in standby, frame + grid in production) without a dimmer, and makes maintenance easier: a failure in one circuit does not switch off the other.
Installation
Two dedicated circuits must be provided at the panel, 160 W and 227.5 W. Mark out the 360 x 240 cm rectangle and install the frame first; it serves as a centering guide for the grid. Assemble the grid on the floor using complete cells, then secure it in the frame. Connect the two cables after locking out the power. Given the size, installation requires two operators using a mobile work platform. A disassembly tool is provided for connection repairs.
Where should you use this hexagon kit?
Body shop, dealership preparation bay, end-of-line quality control area, showroom. For dry indoor installation only.
